Prof. Lab Resin ABS-like, green
Prof. Lab Resin ABS-like, green is a specially developed resin for 3D printing on LCD/UV (MSLA) printers, combining
higher toughness and durability with
fine print details. Thanks to its mechanical properties, it resembles ABS plastic – prints are less brittle than those made with standard resins and better withstand impacts and bending.
The opaque green shade is ideal for
prototypes, technical parts, figurines and models where you need clearly legible details and a good base for further surface finishing (filling, sanding, varnishing, painting).
Key features
- ABS-like mechanical properties – higher toughness, less brittle prints than with standard resin
- High accuracy and detail – sharp edges, fine structures, suitable for technical parts and figurines
- Green color – clearly legible details, suitable for visual inspection of the model and subsequent painting
- Compatible with common LCD/UV printers (405 nm)
- Lower shrinkage than conventional rigid resins – better dimensional accuracy
- Good impact resistance within the ABS-like resin category
- Suitable for prototyping, lightly stressed mechanical parts, covers, holders, mock-ups and models
Recommended use
Prof. Lab Resin ABS-like, green is suitable for:
- functional prototypes and test parts
- small technical components, holders, covers and fixtures
- models and figurines with fine details
- parts that require better impact resistance than standard resin
For maximum strength and durability, we recommend
thorough curing in a UV chamber after cleaning the print in isopropyl alcohol or a suitable cleaning solution.
Technical parameters
The stated values are typical for the category of ABS-like resins intended for 405nm LCD printers. Specific settings may vary slightly depending on the printer type and printing conditions.
- Material type: ABS-like photopolymer resin
- Color: green (opaque)
- Intended for printers: LCD / MSLA / DLP with UV LED 405 nm
- Recommended wavelength: 405 nm
- Recommended exposure times:
- bottom layers: 25–40 s (depending on display power)
- normal layers: 1,8–3,0 s (depending on layer height and printer)
- Recommended layer height: 0,025–0,1 mm
- Hardness (Shore D): approx. 75–85 (typical for ABS-like resins)
- Viscosity: medium (typically 150–300 mPa·s at 25 °C)
- Curing shrinkage: low, suitable for dimensionally accurate parts
- Ambient operating temperature during printing: 20–28 °C
- Recommended print cleaning: isopropyl alcohol (IPA) or a special cleaning solution for resins
- Recommended final curing: UV lamp / UV chamber, 5–15 min depending on model thickness
- Packaging: bottle (typically 0,5–1 l)
Safety and storage
- Wear gloves and eye protection when handling, and avoid direct contact with the skin
- Work in a well-ventilated area
- Do not expose to direct sunlight; store in a dark and dry place at room temperature
- Keep out of reach of children and pets
Tips for successful printing
- Shake the bottle well before each use so that the fillers and pigment are mixed evenly
- When switching from another resin, we recommend cleaning the vat and FEP film
- For optimal results, perform a short test print and fine-tune the exposure times
- After printing, let the model drip back into the vat, then clean it in IPA/cleaning solution
This green ABS-like resin from Prof. Lab is an excellent choice for users looking for a compromise between
durability, detail and easy processing in resin 3D printing.
Key features:
- ABS-like resin with higher toughness and impact resistance than standard resins
- High accuracy and fine details for technical models, figurines and prototypes
- Opaque green shade for good detail visibility and easy painting
- Compatible with common LCD/UV/MSLA 3D printers (405 nm)
- Lower shrinkage and better dimensional accuracy of prints
- Ideal for functional prototypes, small mechanical parts, holders, covers and visual models
- Easy post-processing – sanding, drilling, varnishing, painting
