Prof. Lab Resin ABS-like, black 1 kg
Prof. Lab Resin ABS-like in black is a professional photosensitive resin developed for
functional and mechanically loaded parts with behavior similar to classic
ABS plastic. It combines
high strength, toughness, and good impact resistance with precise detail reproduction and low volumetric shrinkage.
Main features
- ABS-like behavior – higher toughness and lower brittleness than common standard resins
- Deep black shade – professional appearance, suitable for both functional and design parts
- High precision and low shrinkage – stable dimensions, sharp edges, and fine details
- Fast curing (395–405 nm) – reduced printing time and high print success rate
- High strength and rigidity – suitable for prototypes, functional parts, holders, fixtures, and snap-fit joints
- Good wear resistance – the surface withstands normal mechanical stress
- Low viscosity and good flowability – better drainage from the model, cleaner details, and easier cleaning
- Optimized for LCD/DLP/SLA printers with a 395–405 nm UV source
Recommended use
- functional prototypes and mechanical components
- fixtures, holders, covers, grips, snap-fit joints
- RC models, technical models, gadgets
- detailed replicas and design models where a more durable material than ordinary brittle resin is required
Technical parameters (typical values for ABS-like resins)
| Parameter |
Value (typical) |
| Package volume / weight |
1 000 g (approx. 1 l) |
| Color |
black |
| Material type |
photopolymer resin, ABS-like |
| Curing wavelength |
395–405 nm |
| Viscosity |
approx. 150–350 mPa·s |
| Density |
approx. 1,05–1,20 g/cm³ |
| Hardness (Shore D) |
approx. 76–80 D |
| Tensile strength |
approx. 40–60 MPa |
| Flexural strength |
approx. 60–80 MPa |
| Elongation at break |
approx. 10–20 % |
| Recommended layer thickness |
0,025–0,1 mm |
| Typical exposure time (0,05 mm) |
2–8 s / layer* |
| Bottom layers – exposure |
30–60 s* |
*Specific times must be calibrated according to the printer type, UV LED power, and model shape.
Compatibility
The resin is suitable for most common
LCD, DLP, and SLA 3D printers using
395–405 nm UV LEDs, such as Anycubic Photon, Elegoo Mars/Saturn, Creality Halot, Phrozen, and others.
Post-processing
- After printing, let the model drain back into the vat.
- Wash the model in isopropyl alcohol (IPA) or a special resin cleaner, ideally in a resin washing machine.
- After cleaning, let the model dry.
- Additional curing in a UV chamber or direct sunlight to achieve the final mechanical properties.
Safety and storage
- Always use gloves and eye protection when working; do not inhale or swallow cured dust or liquid resin.
- Print in a well-ventilated area.
- Store in a tightly closed bottle, out of reach of children and animals.
- Store in the dark and at room temperature, away from direct sunlight.
Prof. Lab Resin ABS-like, black is the ideal choice for users looking for a
combination of strength, toughness, and precision in one material and who want to reliably print functional parts with a professional appearance.
Key features:
- ABS-like resin with mechanical properties similar to ABS plastic
- Deep black shade for a professional appearance of parts
- High toughness and lower brittleness than standard resins
- High dimensional accuracy and low volumetric shrinkage
- Fast curing at 395–405 nm for shorter printing times
- Good impact and wear resistance, suitable for functional components
- Low viscosity for easy drainage from the model and clean details
- Wide compatibility with LCD/DLP/SLA 3D printers
- Suitable for prototypes, technical parts, holders, covers, and RC models
