PLA filament 1,75 mm is the most versatile material for FDM printing technology, suitable even for printing large objects. Thanks to its simple properties, we recommend PLA to all beginners starting with 3D printing. Another big advantage is its 100% ecological biodegradability, as PLA is produced from renewable resources such as corn starch. PLA material is hard and durable, like other plastics, but it is not suitable for outdoor use because it degrades and becomes brittle under UV light.

PLA Surface Treatment

The material is difficult to sand because sanding (friction) generates heat, which causes "pulling" of fibers from the print. Therefore, it is recommended to cool the print during manual sanding, for example by sanding under water. For the same reason, it is also difficult to drill holes in the print (again, a problem with heating). It is advisable to first spray the object with filler (putty used in modeling) and then sand and repaint it again and again - until the surface is completely smooth, and finally spray it with paint.

Gluing PLA

Superglue with an activator spray (sometimes superglue alone may be enough).

Recommended Settings for PLA Printing

Commonly used nozzles are suitable. You can choose diameters according to the surface fineness you want to achieve or according to the layer thickness settings during printing. Printing temperature: 210 °C. PLA filament does not require a heated bed, but for better material adhesion, it is recommended to heat it up to 55 °C. Furthermore, we do not recommend covering the printer in an enclosure for PLA filament printing, or leave it open. For a high-quality print surface, it is necessary to cool the plastic behind the nozzle as quickly as possible. We therefore recommend setting the plastic cooling fan on the printer to 100%.

The filament is supplied vacuum-packed together with a moisture absorber and placed in a cardboard box. The plastic spools on which the filament is wound may vary in embossing or color. We strive to maintain 100% repeatability of the winding and spool color.