Magigoo ORIGINAL adhesive stick for 3D printing 50 ml

Product Description

Magigoo ORIGINAL adhesive stick for 3D printing (50 ml) is a professional, yet very easy-to-use adhesive preparation for FDM/FFF 3D printing. It was developed specifically to solve the most common problem in printing – poor first layer adhesion and subsequent warping of prints.

After application to the printing surface, Magigoo creates a thin, even layer that ensures reliable adhesion at high bed temperatures. Once the print finishes and the bed cools down, adhesion significantly weakens and the model can in most cases be removed with just a finger, without scrapers or other tools, thereby minimizing the risk of damage to both the print and the printing surface.

It is compatible with most common materials such as PLA, ABS, PETG, TPU, HIPS, and ASA. The adhesive is odorless, non-toxic, and easily washable with water, making it an ideal choice for home workshops, schools, and professional operations.

Key Features

• Reliable first layer adhesion
  • Significantly improves print adhesion to the heated bed and minimizes the risk of corners lifting and warping.
• Smart release after cooling
  • After printing is finished and the bed has cooled, prints easily fall off or can be removed with a light tap – without the need for tools.
• Support for a wide range of materials
  • Optimized for PLA, ABS, PETG, TPU, HIPS, and ASA, the most used printing materials in FDM 3D printing.
• More than 100 uses from one stick
  • Thanks to its concentrated formula and economical application, one 50ml stick lasts for more than 100 typical prints.
• Easy application – Shake, Press, Apply
  • Shake the bottle, press the application tip onto the bed, and spread a thin layer only in the print area.
• Easy cleaning
  • Adhesive residue can be simply wiped off the bed with a damp cloth or rinsed with water.
• Odorless and non-toxic formula
  • Suitable also for printers in offices, schools, and households, where emphasis is placed on safety and comfort.
• Compatibility with various surfaces
  • Can be used on glass, PEI, BuildTak, textured and powder-coated flexible sheets, Kapton tape, and other common printing surfaces.

Recommended Materials and Bed Temperatures

For best results, the manufacturer recommends the following orientation print bed temperatures (values may vary based on specific filament and printer):

*Always adjust specific values to the filament manufacturer's recommendations and your printer's behavior.

Instructions for Use

1. Bed Preparation
   • First clean the bed (ideally with isopropyl alcohol or according to the printer manufacturer's recommendations) and ensure it is free of dust and grease.
2. Magigoo Application
   • Shake thoroughly before use.
   • Remove the cap and press the application tip lightly onto the printing surface to release the adhesive.
   • Spread a thin layer evenly in the area where you will be printing (it is not necessary to cover the entire bed).
   • You can apply to a cold or warm bed, but application to a cold surface is usually more convenient.
3. Printing
   • Set the correct first layer height and bed temperature according to the material used.
   • Start printing as usual.
4. Removing the Print
   • After printing is finished, let the bed cool down completely.
   • Once the bed cools, adhesion significantly weakens and the print can usually be released with just a finger or a light lift.
5. Cleaning and Maintenance
   • Wipe off Magigoo residue with a damp cloth or rinse with water.
   • Store in an upright position, with the cap tightly closed, away from direct sunlight and heat sources.

Typical Use

• Improving first layer adhesion for difficult shapes and large surfaces.
• Suppressing the warping effect for materials sensitive to shrinkage (e.g., ABS, ASA, PETG).
• Protecting the print bed surface from damage when removing prints.
• Suitable for home 3D printers, school and university labs, prototyping, and production sites.

Technical Parameters

• Product Type: adhesive stick / liquid adhesive for 3D printing
• Series: Magigoo Original
• Volume: 50 ml
• Application Form: bottle with application tip (stick / pen)
• Purpose: FDM/FFF 3D printing – print bed adhesive
• Supported Materials: PLA, ABS, PETG, TPU, HIPS, ASA
• Recommended Number of Uses: more than 100 standard prints (depending on surface size)
• Properties: odorless, non-toxic, water-soluble, easily washable
• Applicable Surfaces: glass, PEI, BuildTak, powder-coated flexible sheets, Kapton, and other common printing surfaces
• Storage: in an upright position, well closed, out of reach of direct sunlight

Advantages over conventional adhesives and sprays

• Better application control – thanks to the application tip, you apply exactly where you print.
• Clean and dust-free work – no adhesive spray in the air or mess around the printer.
• Safe composition – suitable for spaces where children or sensitive persons are present.
• Repeatable and consistent results – a proven product used by both hobby users and in professional environments.

Key Features:

• Special adhesive preparation for FDM/FFF 3D printing – solves the problem of poor first layer adhesion.
• Strong adhesion at high bed temperatures, easy print release after cooling.
• Compatible with common materials: PLA, ABS, PETG, TPU, HIPS, and ASA.
• Simple application using the application tip – just shake, press, spread.
• One 50ml stick is enough for more than 100 typical prints.
• Odorless, non-toxic formula, easily washable with water.
• Suitable for glass, PEI, BuildTak, textured and powder-coated sheets, and other surfaces.
• Ideal for home, school, and professional use, where reliability and cleanliness of work are important.