Hotend with Brass Nozzle 0,4 mm for Anycubic Kobra 3 Series – without Heatsink

Reliable Replacement Hotend for Anycubic Kobra 3

Restore 3D printing accuracy and smoothness with a complete hotend designed for Anycubic Kobra 3 Series printers. The assembly is equipped with a universal 0,4 mm brass nozzle, offering an ideal balance between printing speed, surface quality, and level of detail.

The hotend is supplied without a heatsink and is therefore suitable as a replacement for the heating section while retaining the existing print head heatsink.

Stable Heating and Smooth Extrusion

The 24 V heater cartridge ensures rapid achievement of the operating temperature. Thanks to its good thermal conductivity, the brass nozzle supports even filament melting and a consistent material flow. The hotend is particularly suitable for standard non-abrasive filaments such as PLA, PETG, and TPU.

The integrated thermistor continuously monitors the temperature, while the silicone sock reduces heat loss, molten plastic adhesion to the heater block, and assembly contamination.

Direct Replacement without Complicated Modifications

Pre-installed components make it easy to replace a damaged, clogged, or worn hotend. The assembly is compatible with the following models:

• Anycubic Kobra 3
• Anycubic Kobra 3 Combo
• Anycubic Kobra 3 V2
• Anycubic Kobra 3 V2 Combo

When to Replace the Hotend

Replacement is recommended in case of irregular extrusion, repeated nozzle clogging, heater block damage, unstable temperature measurement, or deteriorating print quality. Before ordering, check your printer model and make sure that you need the version without a heatsink.

Before installation, allow the nozzle to cool down, turn off the printer, and disconnect it from the power supply. The brass nozzle is not recommended for long-term printing with highly abrasive filaments containing carbon fiber, glass fiber, metal, or luminescent additives.

Key Features:

• 0,4 mm brass nozzle for a balanced combination of detail and speed
• Compatibility with Anycubic Kobra 3 Series printers
• Pre-installed heater cartridge and temperature sensor
• Silicone sock reduces heat loss and contamination
• Suitable for PLA, PETG, TPU, and other non-abrasive filaments
• Direct replacement for a worn heating section
• Design without a heatsink for use with the existing print head heatsink