Hot-end kit – Sovol SV08 MAX

Hot-end kit – Sovol SV08 MAX

The original hot-end kit for Sovol SV08 MAX is a complete replacement/extrusion set designed for high-speed and long-term reliable printing. It contains an all‑metal hotend with a titanium heatbreak, a 0.4mm SKD11 hardened steel nozzle, an 85W ceramic heating element, and a PT1000 temperature sensor with a range up to 400 °C.

Thanks to the combination of a hard steel nozzle and powerful heating, the kit is ideal for everyday printing from PLA, PETG, or TPU, as well as for more demanding materials with carbon fiber additives or filled filaments. This is an OEM part directly from Sovol, ensuring full compatibility with the Sovol SV08 MAX 3D printer without the need for modifications.

Main Advantages

• Original OEM hotend for Sovol SV08 MAX – 100% mechanical and electrical compatibility.
• All‑metal construction with a titanium heatbreak for stable high-temperature printing.
• 0.4 mm SKD11 hardened steel nozzle – resistant to abrasive materials (CF, GF, filled filaments).
• Powerful 24V / 85W ceramic cartridge – fast temperature rise and stable heating.
• PT1000 temperature sensor (Class B) – precise measurement, sensor rated up to 400 °C.
• Silicone sock – better thermal stability and protection of the block from contamination.
• Easy installation – the hotend is delivered as an assembled module, just screw it on and plug it in.
• Optimized for high-speed printing SV08 MAX with high melt volume.

Package Contents

Specific content may vary slightly depending on the production series, but standardly the kit contains:

• 1× complete all‑metal hotend assembly for Sovol SV08 MAX
• 1× 0.4 mm SKD11 hardened steel nozzle (MK8 thread M6 × 1)
• 1× 24 V / 85 W ceramic heating cartridge
• 1× PT1000 temperature sensor (cable approx. 120 mm, 2pin 1.25 mm connector)
• 1× silicone sock for the heater block
• 1× spring steel bracket for mounting in the SV08 MAX head

Technical Parameters

Use and Assembly

1. Turn off and disconnect the printer from the power supply.
2. Let the existing hotend cool down completely.
3. Remove the original hotend according to the user manual or official Sovol instructions.
4. Install the new hot-end kit on the tool holder, connect the wiring (heater, sensor, fans according to configuration).
5. Check the correct tightening of the nozzle – hot‑tightening is recommended at a temperature approx. 10–20 °C higher than you normally print.
6. After assembly, perform a PID calibration and check that the firmware detects the temperature correctly.

Who is the Hot-end Kit for

• For Sovol SV08 MAX owners who need an original replacement hotend.
• For users who want to reliably print abrasive and technical materials.
• For those who want to maintain the full speed and parameters of the SV08 MAX without experimenting with non-original parts.

This hot-end kit is an ideal choice if you want to be sure of compatibility, easy installation, and long life during everyday and demanding printing on the Sovol SV08 MAX.

Key Features:

• Original OEM hot-end kit for Sovol SV08 MAX 3D printer
• All‑metal construction with titanium heatbreak for high-temperature printing
• 0.4 mm SKD11 hardened steel nozzle suitable for abrasive filaments
• Powerful 24 V / 85 W ceramic heating cartridge for fast heating
• PT1000 temperature sensor with a range up to 400 °C and precise measurement
• Includes a silicone sock for better thermal stability
• Full compatibility with Sovol SV08 MAX high-speed printing
• Simple assembly – delivered as an assembled module ready for installation