3D Stisk
Home
Services
Gembird

GEMBIRD PVA 1 kg natural – water-soluble support filament

Official Gembird 3DP-PVA-01-NAT natural water-soluble PVA filament, 1.75 mm, 1 kg — front three-quarter spool view on a neutral background, 1000 × 1000.
Image thumbnails
€25.38

GEMBIRD PVA natural is a water-soluble filament for printing supports for complex 3D models. It offers 1 kg of filament, a diameter of 1.75 mm, and a natural shade. It dissolves in water at a temperature of 50–60 °C. (tme.eu)

Availability:4 pcs

We process and ship orders immediately during the business day.

Category:Filament, Support
Manufacturer:Gembird

GEMBIRD PVA natural: water-soluble supports for 3D printing

GEMBIRD PVA filament is a support material for models with overhangs and complex shapes, where mechanically removing supports would be difficult. When used with a suitable multimaterial or dual-extruder printer, you can print the supports from PVA and then remove them by dissolving them in water. (elegant3d.cz)

Dissolution in warm water

This particular filament is intended for dissolution in water at a temperature of 50–60 °C. When removing supports, also take into account the temperature resistance of the model's main material. In particular, water that is too warm may cause PLA prints to deform. (tme.eu)

Precise diameter and 1 kg spool

The filament has a diameter of 1.75 mm with a tolerance of ±0.05 mm. One spool contains 1 kg of material, corresponding to approximately 345 meters of filament. The natural version is designated as natural. (tme.eu)

Print settings

Processing the material requires a 3D printer for filament with a diameter of 1.75 mm and an extruder operating at a temperature of approximately 220 °C. The stated melting point of 168 °C is not the recommended printing temperature. Adjust the specific profile to the printer and the combination of materials used. (tme.eu)

Dry storage

PVA is sensitive to moisture. After printing, store the filament in a dry, sealed container so that it maintains suitable conditions for further use. (materialpro3d.cz)

Key features:

  • Water-soluble material for printing support structures.
  • Dissolves in water at a temperature of 50–60 °C.
  • Diameter of 1.75 mm with a tolerance of ±0.05 mm.
  • 1 kg spool with an approximate length of 345 m.
  • Natural color version designated as natural.

Vlastnosti

BarvaNatural
Hmotnost bez obalu1 kg
ManufacturerGEMBIRD
Product designation3DP-PVA-01-NAT
EAN8716309124041
MaterialPVA
ColorNatural (natural)
Filament diameter1.75 mm
Diameter tolerance±0.05 mm
Net filament weight1 kg
Approximate filament length345 m
Melting point168 °C
Required extruder temperatureApproximately 220 °C
Water temperature for dissolution50–60 °C
PackagingFilament on a spool