3D Stisk
Home
Services
Gembird

GEMBIRD HIPS filament red 1 kg

Gembird 3DP-HIPS1.75-01-R red HIPS filament, 1.75 mm, 1 kg — angled spool view on white background, 700 × 500 pixels; sourced from Redcorp.
Image thumbnails
€19.64

Red GEMBIRD HIPS filament with a diameter of 1,75 mm and a weight of 1 kg for standalone prints and dissolvable supports when printing ABS. It offers impact resistance, can be bonded and colored, and dissolves in limonene. (tme.eu)

Availability:Last 2 pcs!

We process and ship orders immediately during the business day.

Category:Filament, Support
Manufacturer:Gembird

GEMBIRD HIPS red: for models and dissolvable supports

GEMBIRD HIPS filament red 1 kg is a printing filament made of tough polystyrene. You can use it as a standalone material or for support structures for ABS prints, for example beneath overhangs and in holes. (tme.eu)

Dissolvable supports for more complex shapes

HIPS dissolves in limonene, offering an alternative to mechanically breaking off supports. To print an ABS model and HIPS supports simultaneously, you need a printer capable of processing both materials in a single print. It is not a water-soluble filament. (tme.eu)

Durability and easy finishing

  • Impact resistance for tough prints.
  • Good dimensional stability of the material.
  • Can be colored after printing.
  • Can be bonded with cyanoacrylate adhesive.

The material can therefore be used not only for supports, but also for standalone parts that you want to finish further. (tme.eu)

Diameter and recommended settings

The filament has a diameter of 1,75 mm with a tolerance of ±0,05 mm. The spool contains 1 kg of material, approximately 400 meters of filament. It is intended for 3D printers that support processing HIPS of this diameter. (hotend.s23.cdn-upgates.com)

Parameter Value
Processing temperature 230–250 °C
Print bed temperature 70–90 °C
Density at 21,5 °C 1,04 g/cm³

Adjust the settings to suit the specific printer and model geometry. (hotend.s23.cdn-upgates.com)

Key features:

  • Dual use: standalone printing and supports for ABS
  • Dissolves in limonene for removing support structures
  • Tough, impact-resistant material
  • Can be colored and bonded with cyanoacrylate adhesive
  • Diameter of 1,75 mm with a tolerance of ±0,05 mm
  • Red version and 1 kg of filament on the spool

Vlastnosti

BarvaČervená
Hmotnost bez obalu1 kg
ManufacturerGEMBIRD
Product code3DP-HIPS1.75-01-R
MaterialHIPS – tough polystyrene
ColorRed
Filament diameter1,75 mm
Diameter tolerance±0,05 mm
Net filament weight1 kg
Approximate filament length400 m
Processing temperature230–250 °C
Print bed temperature70–90 °C
Density at 21,5 °C1,04 g/cm³
SolubilityIn limonene
UseStandalone prints and support structures for ABS
EAN8716309089180