Flashforge Creator 4-A HT

Flashforge Creator 4-A HT – Industrial IDEX 3D printer for technical materials

Flashforge Creator 4-A HT is a professional FFF 3D printer with interchangeable, independent dual extruders (IDEX) and a large build volume of 400 × 350 × 500 mm. The 4-A variant is equipped with a pair of HT (High Temperature, up to 320 °C) extruders, optimized for reliable printing of a wide range of technical filaments.

Thanks to the enclosed, actively heated chamber up to 65 °C and a heated bed up to 120 °C, the printer achieves high dimensional accuracy even with demanding materials such as ABS, PC‑ABS or PAHT. The robust construction with linear guides ensures stability and print quality even during long print jobs and in continuous operation.

Main advantages for professionals

• Large build volume 400 × 350 × 500 mm – for functional parts, jigs, holders, covers, templates and smaller series.
• IDEX system (Interchangeable Independent Dual Extruder) – two independent HT extruders for:
  • Mirror mode – simultaneous mirror printing of left/right part variants.
  • Duplicate mode – duplication of the same model for double productivity.
  • Support mode – separate extruder for support/main material.
• Extruder‑HT up to 320 °C – optimized for technical filaments: PLA, PETG, PC‑ABS, PAHT, ABS, ASA, PP, PA, PC.
• Heated chamber up to 65 °C – minimizes warping and internal stress in technical polymers.
• Heated bed up to 120 °C and flexible magnetic print surface – easy removal of prints without damage.
• HEPA 13 + active carbon filter – significantly reduces dust particles and odors in enclosed spaces.
• Integrated camera – remote print monitoring, suitable for corporate environments and 24/7 operation.
• Filament run-out detection and power loss recovery – protection of long print jobs and minimization of waste.

Typical use

This printer targets industrial and professional users who need:

• production of functional prototypes and technological samples,
• jigs, holders, templates, gauges and manufacturing aids for production,
• end-use parts from technical materials,
• small-batch production of plastic components,
• educational and university laboratories, where high reliability and operational safety are required.

Key features

1. Interchangeable independent dual extruders (IDEX)

• 2× Extruder‑HT in standard equipment (Creator 4-A variant).
• Each extruder is controlled independently – possibility of multiple print modes without compromising speed.
• Max. extruder temperature: 320 °C.
• Recommended nozzles: 0.4 mm (standard), optionally 0.6 / 0.8 mm for faster or more robust printing.
• Print speed up to 200 mm/s (depending on material and model).

2. Large build space and precision

• Build volume: 400 × 350 × 500 mm.
• High repeatability and precision thanks to:
  • linear rails in X/Y axes,
  • solid metal construction,
  • optimized motion control (Cortex‑A53, 4 cores, 64 bit, 1.8 GHz).
• Typical printing precision: ±0.1–0.2 mm (according to manufacturer and tests with reference cubes).

3. Controlled chamber temperature

• Enclosed chamber with active heating up to 65 °C.
• Improves layer adhesion and reduces deformation for materials such as ABS, ASA, PA, PC‑ABS, PAHT.
• Stable environment suitable for long prints and larger parts.

4. Safe and comfortable operation

• HEPA 13 filter + active carbon filter – reduces fine particles and odors.
• Built-in HD camera – print monitoring via network.
• 7" color touch IPS display – intuitive control, temperature settings, calibration and job management.
• Auto leveling (16 points) + manual fine-tuning – precise and stable bed calibration.
• Resume print function after power failure and filament sensor – protection for long prints.

5. Connectivity and software

• Connection: Wi‑Fi, Ethernet, USB flash drive, cloud (FlashCloud).
• Supported software: FlashPrint (recommended), possibility to use Cura with a suitable profile.
• Supported input formats: 3MF, STL, OBJ, FPP, BMP, PNG, JPEG.
• Output formats for printing: GX, G.
• Supported OS: Windows 7/8/10, macOS, Linux.

Technical parameters

Printing and extruders

• Printing technology: FFF (Fused Filament Fabrication)
• Number of extruders: 2 (IDEX, type Extruder‑HT)
• Max. extruder temperature: 320 °C
• Recommended nozzles: 0.4 mm (standard), optional 0.6 / 0.8 mm
• Filament diameter: 1.75 mm
• Supported materials (HT extruder):
  • PLA, PETG
  • ABS, ASA
  • PA, PAHT
  • PC, PC‑ABS
  • PP
• Build volume (single extruder): 400 × 350 × 500 mm
• Print modes: single, duplicate, mirror, dual (support/2 materials)
• Print speed: 10–200 mm/s (depending on material and settings)
• Layer thickness: 0.05–0.4 mm (depending on nozzle and profile)
• Printing precision: typically ±0.1–0.2 mm

Print chamber and bed

• Construction type: fully enclosed, industrial design
• Heated chamber: yes, up to 65 °C
• Print bed: flexible magnetic steel plate
• Max. bed temperature: 120 °C
• Leveling: automatic (multi-point) + manual correction option

Filtration and safety

• Air filtration: HEPA 13 + active carbon filter
• Filament run-out detection: yes
• Power loss recovery: yes (resume print)
• Enclosed print chamber: yes, safer operation in offices and laboratories

Control and connectivity

• Display: 7" color touch IPS
• Camera: integrated HD camera for remote monitoring
• Connection: Wi‑Fi, Ethernet, USB flash drive, cloud services
• Internal storage: 8 GB (according to Creator 4 series manufacturer)

Dimensions and weight

• External printer dimensions (W × D × H): approx. 840 × 675 × 1000 mm
• Printer weight: approx. 90 kg
• Packaging (W × D × H): approx. 990 × 820 × 1260 mm
• Packaging weight: approx. 130 kg

Power supply

• Power consumption: max. 2320 W
• Input voltage: AC 100–130 V / 200–240 V, 50–60 Hz

Key benefits for the customer

• Reliable industrial machine suitable for production, tool shops, R&D and technical schools.
• Wide compatibility with technical materials – from PLA and PETG to ABS, PA, PC‑ABS and PAHT.
• High productivity thanks to IDEX system, mirror and duplicate mode.
• Safe indoor operation – enclosed chamber, HEPA 13 and carbon filter.
• Easy operation – large touch display, automatic leveling, flexible bed and managed profiles in FlashPrint.

This Creator 4‑A HT version is suitable for users who want to make the most of technical materials while maintaining a high degree of automation, comfort and certainty during long prints.

Key features:

• Industrial 3D printer with a large volume of 400 × 350 × 500 mm for functional parts and small-batch production
• Two independent HT extruders (IDEX) for mirror, duplicate and support mode and high productivity
• Maximum extruder temperature 320 °C for technical materials such as ABS, ASA, PA, PC, PAHT, PC-ABS and PP
• Enclosed, actively heated chamber up to 65 °C for stable printing and minimization of part warping
• Heated bed up to 120 °C with flexible magnetic plate for easy removal of prints
• HEPA 13 filter with active carbon for safer operation in office, workshop and laboratory
• Integrated HD camera, Wi‑Fi/Ethernet/USB and cloud for remote monitoring and print job management
• Automatic bed leveling, filament run-out detection and power loss recovery for certainty of long prints
• Robust metal construction with linear guides for high precision and reliability during continuous operation