Free shipping from €82.00

ELEGOO Standard Resin 8K White Smoke is a standard photopolymer resin designed for precise printing of miniatures, models, prototypes, and decorative objects. High-quality pigments and photoinitiators help faithfully capture fine textures, sharp edges, and intricate surfaces.
The smoke-white White Smoke shade emphasizes light and shadow on the model's surface. Prints therefore look clean and well-defined even before painting or other surface treatment.
The low volumetric shrinkage formula supports dimensional stability and accurate reproduction of geometry. The resin is suitable for modern high-resolution printers, allowing you to take advantage of their ability to reproduce extremely fine details.
The result is:
Low viscosity allows the resin to quickly flow back beneath the model between individual layers. This contributes to consistent curing, easier layer separation from the release film, and a high print success rate. Lower peel resistance can also help reduce stress on the FEP/PFA film.
The resin cures with UV light at a wavelength of 405 nm and is compatible with LCD/MSLA and DLP 3D printers. It is an excellent choice for ELEGOO Mars, Saturn, and Jupiter models, but can also be used in compatible printers from other manufacturers.
Thoroughly mix the contents of the bottle before use. Always adjust exposure times to the specific printer, layer height, and ambient temperature. After printing, clean the model with a suitable product for standard resin, remove the supports, and then fully cure it in a UV curing station.
Safety: Uncured resin must not come into contact with skin or eyes. Work in a well-ventilated area and wear protective gloves and goggles. Do not pour material residue into waste or drains.
| Manufacturer | ELEGOO |
| Product line | 8K Standard Resin |
| Material type | Standard UV photopolymer resin |
| Color | White Smoke – smoke white |
| Net weight | 1 kg |
| Curing wavelength | 405 nm |
| Compatible technologies | LCD, MSLA and DLP |
| Viscosity at 25 °C | 250–400 mPa·s |
| Density at 25 °C | 1,05–1,25 g/cm³ |
| Cured hardness | 80–85 Shore D |
| Tensile strength | 45,62 MPa ± 10 % |
| Maximum flexural strength | 58,3 MPa ± 10 % |
| Flexural modulus | 1123,2 MPa ± 10 % |
| Impact strength | 76 J/m ± 10 % |
| Recommended ambient temperature | 25–30 °C |
| Print cleaning | Isopropyl alcohol, ethanol, or a cleaner intended for standard resin |