3D Stisk
Home
Services
Elegoo

Elegoo Rapid PETG Grey 1 kg

ELEGOO RAPID PETG 1 kg Grey filament spool, front product view on a neutral background
Image thumbnails
€12.26

Elegoo Rapid PETG Grey is a high-speed PETG filament for strong, dimensionally accurate, and durable prints. It supports printing speeds of up to 600 mm/s, has a diameter accuracy of ±0.02 mm, and thanks to its low shrinkage, it is suitable for functional parts, prototypes, and technical models.

Availability:Out of stock
€12.26Out of stock
Category:Filament, PETG
Manufacturer:Elegoo

High-speed PETG filament for functional 3D printing

Elegoo Rapid PETG Grey combines the durability of PETG with flow properties optimized for modern high-speed 3D printers. It supports printing speeds of up to 600 mm/s, helping to reduce production times when printing prototypes, structural components, and larger batches.

The neutral grey shade gives models a clean technical appearance and highlights details well. It is suitable for prototypes, brackets, covers, organizers, replacement parts, and other practical prints.

Strong and dimensionally stable prints

Rapid PETG offers increased rigidity, good layer adhesion, and resistance to normal mechanical stress. Low shrinkage and a limited tendency to warp make it easier to print larger models. A diameter accuracy of ±0.02 mm contributes to stable extrusion and consistent surface quality.

Durability for practical use

PETG is suitable for parts where service life and resistance to moisture, water, weather conditions, and common chemicals are important. Elegoo Rapid PETG is therefore useful not only for decorative models, but especially for functional applications at home, in the workshop, or during prototype development.

Reliable material feeding

The filament is precisely wound onto a cardboard spool and dried before packaging. Vacuum packaging with desiccant helps protect the material from moisture, dust, bubbles, and nozzle clogging. The spool contains 1 kg of filament and is compatible with most FDM/FFF 3D printers using 1.75 mm diameter filament.

Recommended print settings

Parameter Recommended value
Nozzle temperature 220–250 °C
Initial nozzle temperature approximately 230 °C
Bed temperature 75–90 °C
Print speed 30–600 mm/s
Cooling up to 100 %
Recommended surface PEI, glass, or fiberglass build plate

Always adjust the specific values according to the capabilities of your printer, hotend type, nozzle diameter, and model geometry. To achieve an optimal surface and reduce stringing, the manufacturer recommends drying the filament for 8 hours at 60 °C before use.

Key features:

  • High-speed printing in the range of 30–600 mm/s
  • Accurate filament diameter with a tolerance of ±0.02 mm
  • Increased rigidity and good mechanical resistance
  • Low shrinkage and reduced risk of warping
  • Resistance to moisture, water, UV radiation, and common chemicals
  • Suitable for functional parts, technical models, and rapid prototypes
  • Precise winding helps reduce filament tangling
  • Vacuum packaging with desiccant
  • Compatible with most FDM/FFF 3D printers

Vlastnosti

BarvaŠedá
Hmotnost bez obalu1 kg
ManufacturerElegoo
Product lineRapid PETG
MaterialPETG
ColorGrey – grey
Filament diameter1.75 mm
Diameter tolerance±0.02 mm
Net filament weight1 kg
Empty spool weight154 ± 10 g
Approximate filament length330–340 m
Recommended nozzle temperature220–250 °C, recommended starting point 230 °C
Recommended bed temperature75–90 °C
Print speed30–600 mm/s
Recommended coolingUp to 100 %
Density1.26 g/cm³
Melt flow index13–15 g/10 min at 190 °C / 2.16 kg
Tensile strength in X–Y axes≥ 51 MPa
Elongation at break in X–Y axes8.8 %
Flexural strength64 MPa
Flexural modulus1072 MPa
Charpy impact strength4.8 kJ/m²
Deflection temperature under load62 °C at 0.45 MPa
Recommended print surfacePEI, glass, or fiberglass build plate; separation adhesive can be used depending on the surface
Recommended drying8 hours at 60 °C
CompatibilityMost FDM/FFF 3D printers for 1.75 mm filament
Spool designCardboard spool
PackagingVacuum-sealed packaging with desiccant