Free shipping from €82.00

E3D Revo High-Temperature Abrasive nozzle 0.6 mm is a premium quick-change nozzle for the E3D Revo system, designed for printing highly abrasive and high-temperature materials such as carbon fiber composites or PEI/PEEK blends. Thanks to its copper construction with Chromium Nitride coating, temperature resistance up to 500 °C, and integrated heatbreak, it offers reliable printing of demanding technical filaments without leaks and with minimal wear.
E3D Revo High-Temperature Abrasive nozzle 0.6 mm is a top-of-the-line nozzle designed for the E3D RapidChange Revo system, specifically developed for high-temperature and highly abrasive materials. It combines a copper nozzle body and a copper spreader for optimal heat transfer, both coated with Chromium Nitride. This coating increases corrosion resistance, improves surface non-stick properties, and allows printing up to 500 °C.
The nozzle has a diameter of 0.6 mm, which is ideal for faster printing of technical parts and fiber composites, where higher flow and good layer strength are required.
The E3D Revo High-Temperature Abrasive 0.6 mm nozzle is intended for E3D RapidChange Revo system hotends with 1.75 mm filament, typically:
Note: When used with a standard 40W/60W Revo HeaterCore, the nozzle is usually temperature-limited to approximately 300 °C. For full use up to 500 °C, it is recommended to use the Revo High-Temperature Hotside / high-temp HeaterCore as per manufacturer recommendations.
| Manufacturer | E3D |
| Model | Revo High-Temperature Abrasive nozzle 0.6 mm |
| Product type | 3D printer nozzle (RapidChange Revo system) |
| Nozzle diameter | 0.6 mm |
| Filament diameter | 1.75 mm |
| Maximum nozzle temperature | up to 500 °C (with high‑temp Revo Hotside) |
| Recommended limit with standard HeaterCore | approx. 300 °C (depending on Revo HeaterCore type) |
| Nozzle body material | copper (nozzle + spreader) |
| Surface treatment | Chromium Nitride (CrN) – wear resistance and non-stick properties |
| Intended for materials | highly abrasive and high-temperature filaments (CF/GL composites, technical polymers) |
| Compatible systems | E3D Revo Micro, Revo Six, Revo Voron, Revo CR, Revo Hemera XS, Revo Prusa MK3, Revo Prusa Mini, Revo MicroSwiss NG, Revo BIQU H2 V2 and other Revo hotends |
| Construction | integrated nozzle + heatbreak (RapidChange Revo) for cold replacement |
| Nozzle color | gray (HT-abrasive range) |
| Packaging | 1 pc nozzle |
| Weight | approx. 10 g |