Free shipping from €82.00

E3D Revo High Flow 0.6 mm nozzle for the E3D RapidChange Revo system allows significantly higher material flow without the need to change mounts or cooling. Thanks to optimized internal geometry, it ensures faster printing, more stable temperature and consistent extrusion, while remaining fully compatible with existing Revo hotends (Revo Six, Revo Micro, Revo Voron, Revo CR, Hemera XS, Revo Prusa etc.). Ideal for large, robust parts, prototypes and rapid production.
E3D Revo High Flow 0.6 mm is a high-flow nozzle for the E3D RapidChange Revo system, which allows for significantly faster printing while maintaining the same external geometry as standard Revo nozzles. Thanks to a specially optimized internal channel, it increases heat transfer to the filaments, allowing for higher volumetric flow and more stable extrusion.
To maximize the potential of High Flow nozzles, it is recommended to increase the maximum volumetric flow in the slicer and potentially use a more powerful 60W HeaterCore when printing materials with higher melting temperatures (e.g., PC, Nylon) and at high speeds.
| Parameter | Value |
|---|---|
| System | E3D RapidChange Revo |
| Type | High Flow nozzle |
| Nozzle diameter | 0.6 mm |
| Filament diameter | 1.75 mm |
| Construction | Pre-assembled nozzle + heatbreak module |
| Hotend compatibility | Revo Micro, Revo Six, Revo Voron, Revo CR, Hemera XS, Revo Prusa MK3/Mini, Revo MicroSwiss NG, Revo Biqu H2 V2 etc. |
| Recommended heating block | Revo HeaterCore 40 W / 60 W |
| Max. temperature (by HeaterCore) | typically up to 300 °C (with standard Revo HeaterCore) |
| Typical application area | Fast printing of large parts, functional prototypes |
| Nozzle material | Brass (standard High Flow variant) |
| System | E3D RapidChange Revo |
| Nozzle type | High Flow nozzle |
| Nozzle diameter | 0.6 mm |
| Filament diameter | 1.75 mm |
| Construction | Pre-assembled nozzle + heatbreak module |
| Nozzle material | Brass (standard High Flow variant for non-abrasive materials) |
| Compatible hotends | Revo Micro, Revo Six, Revo Voron, Revo CR, Revo Hemera XS, Revo Prusa MK3, Revo Prusa Mini, Revo MicroSwiss NG, Revo Biqu H2 V2 and other Revo hotends |
| Recommended heating block | Revo HeaterCore 40 W or 60 W |
| Maximum operating temperature | up to approx. 300 °C (depending on the HeaterCore used and hotend configuration) |
| Typical materials | PLA, PETG, ASA/ABS, TPU and other standard non-abrasive filaments |
| Nozzle replacement | Fast replacement without tools – cold replacement (RapidChange) |
| Compatibility with nozzles | Fully interchangeable with standard Revo nozzles and other Revo High Flow sizes (0.4–1.4 mm) |