3D Stisk
Home
Services
    Bambu Lab

    Double-sided PET‑PEI plate for Bambu Lab H2D H2S

    Double-sided PET‑PEI plate for Bambu Lab H2D H2S
    Alternative
    €48.79
    Double-sided flexible plate for Bambu Lab H2D/H2S with two surfaces in one – smooth PET for reliable PLA/TPU printing and textured PEI for PETG, ABS/ASA and technical materials. Precisely fits the H2 print bed (usable area 350 × 320 mm), holds firmly when hot and releases the print without force after cooling. Easy maintenance, long life and quick replacement thanks to magnetic spring steel.
    Availability:Out of stock
    €48.79Out of stock
    Product code:WC32490
    Category:Spare Parts and Accessories, Print Sheets, For FDM 3D Printers
    Manufacturer:Bambu Lab

    Why this plate

    Get two proven surface finishes in one: smooth PET on one side for clean first layers with PLA/TPU and textured PEI on the other side for reliable adhesion with PETG, ABS/ASA and other technical materials. The plate is designed for the dimensions of the Bambu Lab H2 series, so it fits perfectly and fully utilizes the 350 × 320 mm printing area.

    Main advantages

    • Two surfaces in one: smooth PET (PLA/TPU) and textured PEI (PETG/ABS/ASA).
    • Precise compatibility for Bambu Lab H2D and H2S.
    • Strong adhesion when hot, easy release after cooling.
    • Spring steel with magnetic fixation for quick plate replacement.
    • Durable surface, simple cleaning and long life.

    Recommended use

    • PET side (smooth):
      • PLA/PLA‑CF/PLA‑GF and TPU – recommended 45–65 °C on the bed.
    • PEI side (textured):
      • PETG/PETG‑CF – 60–80 °C; use a thin layer of PVA glue for easier release.
      • ABS/ASA – 90–100 °C; glue recommended.
      • PC/PA etc. – according to the material profile, usually 90–110 °C; often with glue.
    Note: The maximum heatbed temperature for the H2 series is 120 °C. Let the plate cool down before removing the print – you will extend the surface life and make model removal easier.

    Maintenance and care

    • Wipe with IPA (isopropyl) after printing and regularly wash with water and detergent; then dry with a seamless cloth.
    • Do not use acetone – it can damage the surfaces.
    • If adhesion on PEI gradually decreases, gentle sanding (approx. 600 grit) and thorough degreasing often restore adhesion.

    What fits on H2

    • The plate overhang of 355 × 325 mm was designed to ensure stable magnetic holding and full coverage of the usable H2 printing area (350 × 320 mm) for single‑ and dual‑nozzle modes.

    Package contents

    • 1× double-sided flexible PET‑PEI plate 355 × 325 mm (magnetic spring steel, smooth PET + textured PEI).

    Tips for the best first layer

    • Carefully degrease the plate before first use (dish soap + warm water, then IPA) and calibrate the first layer.
    • For PETG and "sticky" materials, use a thin layer of PVA glue on the PEI side for easier release and surface protection.

    Key features:

    • Double-sided plate: smooth PET + textured PEI in one solution
    • Perfect for PLA/TPU on the PET side and for PETG/ABS/ASA on the PEI side
    • Full compatibility with Bambu Lab H2D and H2S printers
    • Spring steel – quick removal of prints by bending the plate after cooling
    • Magnetic fixation, stable heat transfer and flatness
    • Easy maintenance, long surface life

    Vlastnosti

    CompatibilityBambu Lab H2D, H2S
    Plate dimension355 × 325 mm
    Usable print area (H2)350 × 320 mm
    Surface – side ASmooth PET (ideal for PLA/TPU)
    Surface – side BTextured PEI (for PETG/ABS/ASA and technical materials)
    Plate baseMagnetic spring steel (flexible)
    Max. heatbed temperature (printer)120 °C (H2 series)
    Recommended temperatures – PET sidePLA/TPU 45–65 °C
    Recommended temperatures – PEI sidePETG 60–80 °C; ABS/ASA 90–100 °C; PC/PA 90–110 °C (often with PVA glue)
    MaintenanceWashing with water and detergent + IPA; do not use acetone