Free shipping from €82.00

Signus OB-3 desiccant bag with clear silica gel (3 g) for reliable moisture absorption in packaging of electronics, food, pharmaceuticals, and other sensitive products. The bags can be repeatedly regenerated in an oven, extending their lifespan and ensuring long-term protection against corrosion, mold, and material degradation.
Desiccant bags Signus OB-3 are filled with clear silica gel weighing 3 g and are used for effective moisture absorption in closed packages and containers. They protect sensitive products from corrosion, mold, changes in properties, and other negative effects of increased air humidity.
By using a sufficient amount of silica gel in a closed container, a relative humidity lower than 10 % can be achieved, which significantly extends the lifespan of protected products.
Bags can be repeatedly dried and reused:
As soon as vapor stops rising from the bag, the silica gel is regenerated and ready for further use.
Always pay attention to safety during regeneration, do not leave the oven unattended, and adapt the process to the specific device.
Desiccant bags Silica Gel Signus OB-3 are also ideal for the 3D printing area:
This helps to maintain better print quality, minimize popping, bubbles in the print, and other defects caused by moisture in the filament.
| Parameter | Value |
|---|---|
| Product type | Desiccant bag with silica gel |
| Designation | Signus OB-3 |
| Filling weight | 3 g silica gel |
| Silica gel type | clear, without indicator |
| Bulk density | approx. 620–700 g/l |
| Adsorption at 20 % RH | approx. 11.0 % (relative to its own weight) |
| Adsorption at 50 % RH | approx. 25.5 % |
| Adsorption at 90 % RH | approx. 36.0 % |
| Active surface | approx. 800 m²/g |
| pH | 4–6 |
| Pore diameter | 2.0–3.0 nm |
| Pore volume | 0.35–0.45 ml/g |
| Loss on ignition (950 °C) | approx. 6.7 % |
| Recommended regeneration temperature | 130–160 °C (electric oven) |
| Recommended microwave power | approx. 650 W, defrost program |
The package contents may vary depending on the selected product variant (e.g., set of 100 pcs, carton of 5000 pcs). However, each individual bag always contains 3 g of clear silica gel.
The desiccant bag Silica Gel Signus OB-3 (3g) is a practical and affordable accessory for anyone who needs to reliably protect their products, materials, and especially 3D printing filaments from the harmful effects of moisture.
| Product type | desiccant bag with silica gel |
| Designation | Signus OB-3 |
| Filling weight | 3 g of clear silica gel |
| Silica gel bulk density | approx. 620–700 g/l |
| Adsorption capacity at 20 % RH (23 °C) | approx. 11.0 % (relative to its own weight) |
| Adsorption capacity at 50 % RH (23 °C) | approx. 25.5 % |
| Adsorption capacity at 90 % RH (23 °C) | approx. 36.0 % |
| Active surface | approx. 800 m²/g |
| pH | 4–6 |
| Pore diameter | 2.0–3.0 nm |
| Pore volume | 0.35–0.45 ml/g |
| Loss on ignition | approx. 6.7 % at 950 °C |
| Recommended regeneration temperature | 130–160 °C (electric oven) |
| Approx. regeneration time in microwave oven | approx. 100 g / 1 min at 650 W (defrost program) |
| Use | moisture protection – electronics, pharmacy, food, textiles, industrial packaging, 3D printing filaments |
| Silica gel type | clear, without moisture indicator |