CreatBot PEEK-300 – Industrial 3D Printer for PEEK and High-Temperature Polymers

CreatBot PEEK-300 is a top-tier industrial 3D printer designed specifically for printing high-performance polymers such as PEEK, PEKK, PEI (ULTEM), and PPSU. It combines a 120 °C heated chamber, a dual extruder up to 500 °C, a 200 °C heated bed, and the unique Direct Annealing System (DAS), which directly anneals prints up to 400 °C during the printing process for maximum strength and dimensional stability.

With a large build volume of 300 × 300 × 400 mm, an enclosed design, and high-quality thermal insulation, the PEEK-300 is intended for development, testing, and series production of functional parts in demanding industrial environments – from aerospace and automotive to rail and healthcare.

Main Advantages and Applications

• Printing PEEK and other high-performance plastics thanks to extruders up to 500 °C and a 120 °C chamber.
• Patented Direct Annealing System (DAS) – continuous annealing of the part up to 400 °C directly during printing minimizes internal stress, deformation, and cracking of large technical prints.
• Large build volume 300 × 300 × 400 mm for bulky functional components and small series.
• Dual, electronically liftable extruders allow printing material combinations (e.g., PEEK + soluble support).
• Fully enclosed and heated chamber with triple thermal insulation ensures stable conditions for demanding materials.
• Highly durable components – motors, linear guides, belts, and electronics sized for long-term operation at high temperatures.
• Integrated HEPA filter for safer operation in workshops and laboratories.

Typical Areas of Use

• Aerospace and space industry – lightweight and durable fixtures, brackets, functional parts
• Automotive and motorsport – air duct ends, fixtures, components near the engine
• Healthcare and laboratories – holders, devices, fixtures from medical PEEK (subject to certification of the material used)
• Industrial automation – fixtures, clamps, parts replacing metal components
• Material research and development – testing PEEK/PEKK/PEI composites and process parameters

Key Features

1. High-Temperature Dual Extruder

• 2× direct drive extruder with electronic nozzle lift.
• Max. nozzle temperature up to 500 °C – suitable for PEEK, PEKK, PEI, PPSU, and filled composites.
• Standard nozzle diameter 0.4 mm (optional 0.3–1.0 mm for fine detail or high-volume printing).
• Also suitable for standard and engineering materials (PLA, ABS, ASA, PC, PA, PETG, TPU, carbon or glass fiber reinforced composites).

2. Heated Chamber and DAS System

• Enclosed and heated print chamber up to 120 °C – eliminates warping and cracking of prints.
• Direct Annealing System (DAS) – controlled annealing of parts in the range of 0–400 °C directly during printing.
• Triple thermal insulation for quiet and energy-efficient operation.

3. Large Build Volume

• 300 × 300 × 400 mm – sufficient space for large functional parts, fixtures, or multiple pieces at once.
• In dual printing, the usable volume for two extruders is designed to allow effective use of supports and multiple materials.

4. Professional Print Platform

• Bed with max. temperature 200 °C.
• Construction: aluminum/PCB base with removable surface (carbon/PEEK surface according to distributor configuration).
• Automatic and manual leveling (BL‑Touch / sensor-based alignment).

5. Reliability and Safety

• Filament run-out detection – the printer pauses printing when material runs out.
• Power-off recovery – safe saving of print data and resumption after power-on.
• Emergency stop and robust industrial electronics.
• HEPA filter to reduce particle emissions when printing technical and high-temperature materials.

6. Control and Software

• 4.3" color touchscreen with multi-language interface.
• Connection and data transfer: USB cable / USB flash drive.
• Supported slicers: CreatWare, Simplify3D, Cura, Slic3r.
• Supported formats: STL, OBJ, AMF, G-code.

Technical Parameters

Printing

• Printing technology: FFF / FDM
• Build volume (single): 300 × 300 × 400 mm
• Number of extruders: 2 (dual, electronically liftable heads)
• Extruder type: direct drive
• Filament diameter: 1.75 mm
• Nozzle diameter: 0.4 mm (optional 0.3–1.0 mm)
• Layer height range: approx. 0.04–0.5 mm
• Recommended print speed: 10–150 mm/s (depending on material)

Temperatures

• Max. nozzle temperature: up to 500 °C
• Max. heated chamber temperature: 120 °C
• Max. bed temperature: 200 °C
• DAS – annealing: 0–400 °C

Compatible Materials (Selection)

• Standard materials: PLA, PETG, ABS, ASA, TPU, PA6, PA12, PP, PC, POM, PVDF
• High-temperature / engineering: PPSU, PSU, PEI (ULTEM), high-temperature PA, carbon and glass fiber composites
• High-performance materials: PEEK, PEKK, CF‑PEEK (carbon-filled PEEK), GF‑PEEK (glass-filled PEEK) – depending on the filament used

Mechanics and Construction

• Construction: fully enclosed, solid metal frame
• Cooling: combination of water cooling and air pump
• Bed: aluminum/PCB base with removable carbon/PEEK surface (per configuration)
• Bed leveling: automatic (BL‑Touch) + manual calibration option
• HEPA filter: yes

Electrical Parameters

• Power supply: 200–240 V AC, 50–60 Hz, approx. 20 A
• Max. power consumption: up to 4600 W

Control and Connection

• Display: 4.3" color touch
• Connection: USB cable, USB flash drive

Dimensions and Weight

• Printer dimensions (W × D × H): approx. 650 × 600 × 750 mm
• Device weight: approx. 100 kg
• Packaging dimensions: approximately 820 × 720 × 1080 mm

Why Include CreatBot PEEK-300 in Your Production

CreatBot PEEK-300 brings a combination of high operating temperatures, large build volume, stable heated environment, and automated part annealing. This makes it an ideal choice for companies and development centers that want to:

• replace metal parts with lighter and chemically resistant polymer components,
• reduce time and costs for producing fixtures, molds, and functional prototypes,
• gain full control over printing demanding materials like PEEK or PEKK,
• deploy reliable, industrial 3D printing with long-term stable quality.

CreatBot PEEK-300 is a robust tool for professionals who demand maximum performance, reproducible quality, and broad compatibility of high-performance materials in one device.

Key Features:

• Industrial 3D printer for high-temperature polymers (PEEK, PEKK, PEI, PPSU, and more)
• Dual direct extruders up to 500 °C with electronic lift for multi-material and support printing
• Heated enclosed chamber up to 120 °C with triple thermal shielding
• Direct Annealing System (DAS) for controlled annealing of parts 0–400 °C during printing
• Large build volume 300 × 300 × 400 mm for bulky functional parts and small series
• Heated bed 200 °C with automatic leveling and durable print surface
• Robust all-metal construction and high-temperature components for long-term industrial operation
• Integrated HEPA filter, emergency stop, power-off recovery, and filament detection
• Support for a wide range of slicers (CreatWare, Simplify3D, Cura, Slic3r) and standard 3D formats