CreatBot F430 NX – professional 3D printer for engineering plastics

CreatBot F430 NX is a top-of-the-line FDM 3D printer designed for demanding users who require stable industrial printing in a compact desktop design. Thanks to dual extruders (260 °C + 420 °C), a heated chamber (70 °C) and a print area of 400 × 300 × 300 mm, it handles both common materials such as PLA/ABS, as well as high-performance engineering polymers (e.g. nylon, PC, PEEK, PEI/ULTEM) and carbon or glass fiber composites.

Main advantages for professional use

• Large build volume 400 × 300 × 300 mm – plenty of space for functional parts, fixtures, templates and larger prototypes.
• Dual extruder 260 °C + 420 °C – universal left nozzle for common materials, right high-temperature nozzle for engineering plastics and composites.
• Closed and heated chamber (up to 70 °C) – minimizes deformation, cracking and improves print quality of technical plastics (ABS, nylon, PC, PEEK…).
• Heated bed 140 °C – reliable adhesion for plastics with high shrinkage.
• High print accuracy up to 0.04 mm – quality surface and detailed geometry.
• Reliable 24/7 operation – robust steel and aluminum construction for continuous industrial operation.
• Power failure recovery & filament sensor – protection for long prints and saving of material and time.
• HEPA air filter – higher safety and comfort in the office, school or laboratory.
• Auto bed leveling – fast and accurate setup before printing.
• Open material ecosystem – possibility to use a wide range of filaments from different manufacturers.

Typical use of CreatBot F430 NX

• Industrial prototyping – fast production of functional prototypes from ABS, PC, nylon or composites.
• Manufacturing fixtures and tools – custom fixtures, clamps, gauges, templates and ergonomic tools.
• Functional and end-use parts – covers, brackets, parts in production lines, spare parts.
• Education and research – universities, high schools and research facilities focused on engineering plastics.
• Additive manufacturing from PEEK/PEI – for users who want to experiment with high-performance polymers.

Supported materials

Thanks to high-temperature heads, a heated chamber and robust mechanics, the F430 NX supports a wide range of filaments:

• Common materials: PLA, ABS, PETG, TPU/TPE, PVA (water-soluble supports)
• Technical and industrial materials: PC, ASA, PA (nylon), UltraPA, PA-CF, PA-GF, PP, PVDF
• High-performance polymers: PEEK, PEI/ULTEM
• Composites: filaments with carbon and glass fibers (CF/GF), filled materials (woodfill etc.)

Note: For printing PEEK/PEI and fiber-filled filaments, the use of appropriate nozzles and print profiles from the filament manufacturer is recommended.

Key functions and features

Dual extruder 260 °C + 420 °C

• Left nozzle with temperature up to 260 °C for PLA, ABS, PETG, TPU, PVA and most common filaments.
• Right nozzle made of martensitic steel with temperature up to 420 °C for PEEK, PEI/ULTEM, PC, nylon and composites.
• Exchangeable nozzles with diameters 0.3 / 0.4 / 0.5 / 0.6 / 0.8 / 1.0 mm for various applications.

Closed, heated chamber

• Chamber with active heating up to 70 °C.
• Stable ambient temperature significantly reduces delamination, warping and cracking.
• Suitable for ABS, nylon, PC, PEEK and other materials with high shrinkage.

Print bed and automatic leveling

• Glass-ceramic / aluminum bed with a surface suitable for a wide range of filaments and temperature up to 140 °C.
• Supports the use of PEI sheet or other surfaces (BuildTak etc.) for optimal adhesion.
• Auto bed leveling using a sensor – compensates for bed unevenness during printing.

Safety and comfort

• HEPA filter absorbs fine particles and fumes when printing ABS, nylon, PC and other engineering plastics.
• Suitable for installation in offices, laboratories, schools and smaller production facilities.

Reliability during long prints

• Power failure recovery function – the printer saves the position, initiates filament retraction and continues printing after power is restored.
• Filament run-out sensor – pauses printing when filament is low and prompts for replacement.
• Automatic shutdown after print completion – saves energy and increases safety.

Control and software

• 4.3" color touchscreen for intuitive control.
• Data transfer via USB (flash drive).
• Support for common slicers: CreatWare, Cura, Simplify3D, Slic3r and others.
• Compatible with Windows and macOS.

Technical parameters CreatBot F430 NX

Why choose CreatBot F430 NX for your operation

• Combination of industrial parameters and desktop design – easy placement in an office, workshop or laboratory.
• Wide material compatibility – from low-cost prototyping in PLA to demanding parts from PEEK/PEI.
• High 24/7 reliability – suitable for long and repeated production series.
• Open system – possibility to optimize profiles and filaments according to your specific applications.

CreatBot F430 NX is the ideal choice for companies and institutions looking for a universal, robust and accurate 3D printer for engineering and industrial applications without compromises between quality, stability and operating cost.

Key features:

• Professional desktop 3D printer with a large build volume of 400 × 300 × 300 mm
• Dual extruder 260 °C + 420 °C for common and high-performance materials including PEEK/PEI
• Closed and heated chamber up to 70 °C for stable printing of engineering plastics
• Heated bed up to 140 °C with a quality surface for reliable adhesion
• High print accuracy up to 0.04 mm and robust steel-aluminum construction for 24/7 operation
• Power failure recovery function and filament run-out sensor for safe long printing
• Integrated HEPA filter for safer operation in the office, school or laboratory
• Auto bed leveling for convenient setup
• Open material system – wide compatibility of industrial and special filaments