Creality K2 Plus double-sided PEI plate (textured, spring steel)

Product description

The double-sided PEI plate for Creality K2 Plus provides reliable adhesion and a consistent first layer across the entire surface. The plate is made of spring steel and has a powder-coated (textured) PEI surface on both sides – after printing is finished, simply flex the plate slightly and the print will "pop off" by itself.

Compatibility and dimensions

• Designed for: Creality K2 Plus
• Physical plate size: 370 × 370 mm
• Recommended print area: 350 × 350 mm (exactly according to the K2 Plus format)

Material and surface

• Base: spring steel (flexible, with high flatness)
• Surface: double-sided textured/powder-coated PEI for strong adhesion of a wide range of materials (PLA, PETG, ABS/ASA, TPU, PC, PA etc.).

How it works

• The plate is attached to the printer’s magnetic base – it holds firmly during printing, and after completion you can easily remove it and flex it to release the print effortlessly and without damaging the surface.

Key features

• Double-sided textured PEI surface for long service life and consistent first layers.
• Large format tailored for K2 Plus: 370 × 370 mm (print 350 × 350 mm).
• Spring steel – easy print removal by flexing, high flatness.
• High adhesion for PLA, PETG, ABS/ASA, TPU, PC, PA and others.
• Compatible with the K2 Plus magnetic build plate; tool-free installation.

Technical parameters

• Plate dimensions: 370 × 370 mm
• Print area: 350 × 350 mm
• Plate material: spring steel, thickness approx. 0,4 mm
• Surface: PEI, powder-coated (textured), usable on both sides
• Surface color: black (textured)
• Mounting: magnetic base (flex plate)
• Compatibility: Creality K2 Plus
• Recommended materials: PLA, PETG, ABS/ASA, TPU, PC, PA etc.

Note: Thickness 0,4 mm and double-sided textured finish according to proven aftermarket solutions for K2 Plus; the official Creality “Frosted” plate for K2 Plus uses powder-coated PEI with the same format.

Tips for use and maintenance

• Keep the surface clean before printing; for regular maintenance, washing with mild detergent and water is sufficient, then dry thoroughly.
• For PETG/PA and highly adhesive materials, consider a release layer (e.g. glue stick) for easier model removal.
• When removing the print, do not scrape with sharp tools; gently flex the plate to release the model.

Key features:

• Double-sided textured PEI for long life and excellent adhesion.
• Exact 370×370 mm format for K2 Plus, 350×350 mm print area.
• Spring steel – easy model removal by flexing without scratching the surface.
• Compatibility with a wide range of filaments including technical materials.
• Magnetic mounting – quick plate replacement without tools.
• High flatness for a consistent first layer and reliable printing.