BIQU Panda CryoGrip Pro Glacier – Purple, printing plate 257 × 257 mm

Purple printing plate for Bambu Lab

BIQU Panda CryoGrip Pro Glacier – Purple combines a finely textured surface with a double-sided design. The plate measuring 257 × 257 mm is designed for Bambu Lab X1, P1, and A1 series printers. Compared to the coarser Frostbite variant, Glacier has a finer surface structure. (3djake.cz)

Strong first layer at a lower temperature

The CryoGrip Pro surface helps keep the model on the plate and reduce corner lifting. For PLA, the manufacturer recommends a plate temperature of 45–55 °C, and for PETG 60–75 °C. A lower temperature setting can reduce energy consumption during printing. (biqu.equipment)

Flexible plate for convenient model removal

The foundation is magnetic spring steel with a seven-layer construction. After printing is complete, the plate can be removed and gently bent to make it easier to separate the print. Both sides can be used. The thermally insulated honeycomb handle makes handling easier. (biqu.equipment)

Not only for PLA and PETG

The plate also supports ABS, ASA, TPU, and selected engineering filaments, including nylon. Always adjust the settings to the specific material; a lower plate temperature does not replace the filament's requirements for printing conditions. (biqu.equipment)

Compatibility

• Bambu Lab X1 Carbon and X1E
• Bambu Lab P1P and P1S
• Bambu Lab A1

This size is not intended for the A1 mini, which requires a smaller plate variant. (3djake.cz)

Key features:

• Finely textured Glacier surface in purple
• First-layer adhesion at lower plate temperatures
• Double-sided flexible steel plate
• Easier print release by gently bending the plate
• Seven-layer CryoGrip Pro construction
• Thermally insulated honeycomb handle