BIQU Panda CryoGrip Pro Glacier – pink double-sided print plate for Bambu Lab

BIQU Panda CryoGrip Pro Glacier Pink for more reliable first layers

The pink BIQU Panda CryoGrip Pro Glacier print plate combines a finely textured surface with a double-sided design. It is intended for Bambu Lab X1 and P1 series printers and the A1 model. The Pink version measures 257 × 257 mm; it is not the smaller plate for the A1 mini. (3djake.cz)

Adhesion at lower temperatures

The CryoGrip surface helps keep the first layer in place and reduce corner lifting. A plate temperature of 45–55 °C is recommended for PLA and 60–75 °C for PETG. The plate enables printing without adhesive; however, always adapt the specific settings to the filament used and the model geometry. Glacier therefore does not need to be used exclusively as an unheated plate. (cdn.shopify.com)

Seven layers and two printing sides

The base is made of ferromagnetic spring steel, supplemented by base, protective, and top layers. The seven-layer construction combines plate flexibility with an adhesive polymer surface. Both sides can be used for printing, and the finished model can be released by gently bending the plate. The Glacier surface has a finer texture than the Frostbite version. (cdn.shopify.com)

For standard and selected technical filaments

In addition to PLA and PETG, Glacier also supports selected technical materials, such as ABS and PA. The suitability of a specific filament depends on its printing conditions; for technical materials, check the recommended profile and temperature limitations. (cdn.shopify.com)

Easy maintenance

To restore adhesion, keep the print surface clean. Glacier can be cleaned with water and soap or alcohol. The practical heat-insulating handle makes handling the plate easier. (cdn.shopify.com)

Key features:

• Finely textured Glacier surface for reliable first-layer adhesion
• Double-sided printing surface with CryoGrip coating
• Spring steel for easy model release by bending the plate
• Seven-layer construction with protective and adhesive layers
• PLA and PETG printing at lower recommended plate temperatures
• Distinctive pink design and heat-insulating handle