BIQU Panda CryoGrip Pro Glacier – green double-sided build plate for Bambu Lab X1/P1/A1

BIQU Panda CryoGrip Pro Glacier: more reliable first layer

The green BIQU Panda CryoGrip Pro Glacier build plate offers a finely textured surface and a double-sided design. It is intended for Bambu Lab X1 and P1 series printers and the A1 model. It helps keep the first layer in place and reduces model edge lifting during printing. (biqu.equipment)

Adhesion without unnecessarily high temperatures

The CryoGrip surface supports good adhesion at lower build plate temperatures than standard PEI plates. For PLA, the recommended starting range is 45–55 °C, and for PETG 60–75 °C. Adjust the specific settings to the filament and model geometry; the low-temperature design does not mean that all materials can be printed without heating. (biqu.equipment)

Double-sided plate for more convenient use

The foundation is ferromagnetic spring steel with a seven-layer surface finish. You can use both sides of the plate. The flexible design allows you to release the finished model by bending the plate, while the fine Glacier texture creates a less pronounced imprint than the coarser Frostbite variant. (biqu.equipment)

For standard and selected technical filaments

Glacier is suitable for PLA, PETG, ABS, TPU, and selected technical materials including PA. Adhesion depends on the specific filament; some materials may require adhesive or additional adjustment of the printing conditions. The surface can be cleaned with water and dish soap. (cdn.shopify.com)

Compatibility and dimensions

This variant is intended for Bambu Lab A1, P1P, P1S, X1C, and X1E. The plate dimensions are 257 × 257 mm. It is not the smaller variant for the A1 mini or the large-format plate for the H2 series. (biqu.equipment)

Key features:

• Finely textured Glacier surface
• Green color variant
• Double-sided flexible steel plate
• Seven-layer CryoGrip Pro construction
• Good adhesion at lower build plate temperatures
• Easy print removal by bending the plate