Bambu Lab supports for PA/PET - support

Bambu Lab Support for PA/PET is a support filament for support contact layers when printing with selected PA and PET materials. After printing, it can be removed by hand and helps create a clean model contact surface.

When to use it

The manufacturer recommends it for PAHT-CF, PA6-CF, PA6-GF, and PET-CF. The filament is intended only as a support interface and is not designed for printing models on its own.

Important before printing

• The filament diameter is 1,75 mm with a tolerance of +/- 0,03 mm.
• An enclosed 3D printer is required.
• Use a hotend with a hardened steel nozzle with a diameter of 0,4, 0,6, or 0,8 mm.
• The filament is compatible with AMS, not AMS lite.
• Dry it before printing and protect it from moisture during printing.

After printing

Remove the supports as soon as possible. The material is not water-soluble and must be removed mechanically by hand.