Product Description

Bambu Lab Power Switch Module with 2Pin XH2.54 Connector (1PCS) – XA007 is a small but very practical power switch designed for electronics projects and the Bambu Lab modular system (e.g., CyberBrick). It allows you to conveniently turn the power on and off without physically disconnecting the battery or power cable.

There are two 2-pin XH2.54 connectors on the board, which are connected in series between the power source and the powered device or expansion board. Using the switch, you can easily disconnect the voltage and prevent permanent standby consumption, which would otherwise drain the battery or unnecessarily increase consumption.

The package also includes a 100mm wire with 2-pin XH2.54 connectors, making installation quick and requiring no soldering.

Main Advantages and Use

• Simple power control – two-position rocker switch for quick on/off.
• No battery disconnection – saves connectors and facilitates work with battery assemblies.
• Compatibility with Bambu Lab CyberBrick and other modules with a 2-pin XH2.54 connector.
• Safe operation up to 12.6 V and 3 A – suitable for small motors, LED modules, control boards, and small electronics.
• Compact dimensions – easy to place in 3D printed boxes and projects.

Typical use:

• power switch in robotic and RC models built from Bambu Lab CyberBrick parts,
• external switch for small battery-powered electronic assemblies,
• integration into 3D printed boxes and panels as a main switch for modular projects.

Technical Parameters

Package Content

• 1× Bambu Lab Power Switch Module – XA007
• 1× connection cable 100 mm with 2-pin XH2.54 connectors

Compatibility and Integration

The module is primarily designed for the Bambu Lab CyberBrick system and its respective control and power modules, but thanks to the standard 2-pin XH2.54 connector, it can also be used in other low-voltage and low-current projects where you need a reliable mechanical power switch.

Thanks to its small dimensions, it fits easily into 3D printed mounts, panels, and boxes that you can print on your 3D printer.

Safety Recommendations

• Do not exceed the maximum voltage of 12.6 V and the rated current of 3 A.
• The module is intended for low-voltage DC applications; it is not suitable for 230 V mains voltage.
• Ensure sufficient mechanical fastening of the module and cable to prevent damage to the connectors.

This module is an ideal accessory for anyone building modular 3D printing, robotic, or educational projects who needs an elegant and safe way to disconnect power.

Key Features:

• Original Bambu Lab Power Switch Module (XA007) for power control in low-voltage DC applications.
• Two 2-pin XH2.54 connectors allow easy serial connection between the power source and the device or expansion board.
• Maximum input voltage of 12.6 V and rated current of 3 A for safe use with motors, LED modules, and control boards.
• Includes a 100mm cable with 2-pin XH2.54 connectors – immediate installation without soldering.
• Compact dimensions of 29 × 13 × 15.2 mm and low weight of 4.1 g, ideal for integration into 3D printed boxes and projects.
• Designed for the Bambu Lab CyberBrick system, but usable in other projects with 2-pin XH2.54 connectors.
• Allows power disconnection without needing to remove the battery, reducing connector wear and standby losses.