Bambu Lab PETG Matte Gray: a matte look for practical prints
Bambu Lab PETG Matte Gray 1 kg – Refill is a gray PETG filament for projects where both appearance and functionality matter. It combines strength, toughness, and good layer adhesion with a smooth matte surface. (store.bblcdn.eu)
Less shine, a cleaner appearance
The matte surface helps visually reduce the visibility of print layers. The modified composition also reduces common issues associated with traditional PETG, such as stringing and moisture-related clumping. Easier support removal simplifies the finishing of more complex models. (forum.bambulab.com)
For organizers, holders, and flower pots
The material is suitable, for example, for
bathroom organizers, soap dishes, hooks, shelves, and flower pots. It thus combines a matte appearance with the durability of PETG for everyday use. (forum.bambulab.com)
Refill without an additional spool
The
Refill variant contains 1 kg of filament without a spool. The refill must be mounted onto a compatible reusable spool before printing. The Gray shade has the color designation
35102. (nex3d.com)
Recommended print settings
| Parameter |
Recommended value |
| Nozzle temperature |
230–260 °C |
| Build plate temperature |
65–75 °C |
| Print speed |
Less than 250 mm/s |
| Drying in a hot-air dryer |
65 °C for 8 hours |
| Humidity during storage and printing |
Below 20 % RH |
The filament supports
AMS, AMS 2 Pro, AMS HT, and AMS lite. Use it dry and store it in a sealed package with desiccant. Glue is recommended when printing on the recommended build plates; adjust the specific settings to suit your printer and model. (store.bblcdn.eu)
Key features:
- The smooth matte surface helps reduce the visibility of layers
- Strength, toughness, and good layer adhesion
- Modified composition for easier printing and reduced stringing
- Easier support removal
- Compatibility with AMS, AMS 2 Pro, AMS HT, and AMS lite
- 1 kg refill without a spool for use with a compatible reusable spool
