Bambu Lab PETG Matte Black 1 kg – matte black filament

Bambu Lab PETG Matte Black: a matte look for practical prints

Bambu Lab PETG Matte Black 1 kg is a black PETG filament for models where both appearance and usability matter. The fine matte surface reduces shine and helps visually conceal individual printed layers. The result is visually consistent prints suitable for both decorative and everyday use. (forum.bambulab.com)

Cleaner printing and easier support removal

The modified formulation helps reduce stringing, meaning unwanted fibers between parts of the model, as well as the formation of small blobs. It also makes it easier to separate supports printed from the same material while maintaining good layer adhesion. This is particularly useful for complex models, overhangs, and deeper openings. (forum.bambulab.com)

What is matte black PETG suitable for?

Visual covers and cases where you do not want a pronounced plastic shine.
Holders, hooks, and organizers for the home or workshop.
Bathroom accessories, such as soap dishes and storage compartments.
Planter covers and decorative functional parts for interiors and outdoor environments.

The material combines the toughness of PETG with print resistance to moisture and weathering. For stressed components, always adapt the design, layer orientation, and infill to the actual load. (forum.bambulab.com)

Compatibility with Bambu Lab and AMS

PETG Matte supports all Bambu Lab 3D printers and the AMS, AMS lite, AMS 2 Pro, and AMS HT systems. RFID enables automatic loading of material information in a compatible AMS system. The filament has a diameter of 1,75 mm with a tolerance of ±0,03 mm and a net weight of 1 kg. (store.bblcdn.eu)

Recommended print settings

Parameter	Recommended value
Nozzle temperature	230–260 °C
Build plate temperature	65–75 °C
Print speed	Less than 250 mm/s
Nozzle diameters	0,2 / 0,4 / 0,6 / 0,8 mm
Print surfaces	Textured PEI, Smooth PEI, Cool Plate SuperTack
Drying in a forced-air dryer	65 °C for 8 hours
Humidity during printing and storage	Below 20 % RH

The stated values are initial recommendations; adjust the specific settings to your printer and model geometry. Use the recommended adhesive release layer on PEI and allow the build plate to cool completely before removing the print. (store.bblcdn.eu)

Storage and important warnings

Store the filament in a sealed package with desiccant. After exposure to relative humidity above 50 % for more than 72 hours, dry it before printing. PETG Matte is not recommended as a support material for PLA and is not intended for food contact. Print in a well-ventilated area. (innoaddi.com)

Key features:

The matte black surface helps visually suppress print layers.
Tough PETG for visual and practical prints.
The modified formulation reduces stringing and blob formation.
Easier separation of supports printed from the same material.
Compatibility with AMS, AMS lite, AMS 2 Pro, and AMS HT.
RFID for automatic material recognition.
Net filament weight of 1 kg.

Vlastnosti

Barva	Černá
Hmotnost bez obalu	1 kg
Manufacturer	Bambu Lab
Material	PETG Matte
Color	Black
Color code	35101
Print surface	Matte, with low gloss
Net filament weight	1 kg
Filament diameter	1,75 mm
Diameter tolerance	±0,03 mm
Recommended nozzle temperature	230–260 °C
Recommended build plate temperature	65–75 °C
Recommended print speed	Less than 250 mm/s
Supported nozzle diameters	0,2 / 0,4 / 0,6 / 0,8 mm
Recommended print surfaces	Textured PEI Plate, Smooth PEI Plate, Cool Plate SuperTack
Print surface preparation	A glue stick or liquid glue is recommended as a release layer
Forced-air drying	65 °C for 8 hours
Recommended humidity during printing and storage	Below 20 % RH, sealed package with desiccant
Printer compatibility	All Bambu Lab 3D printers
Material system compatibility	AMS, AMS lite, AMS 2 Pro, AMS HT
Automatic material recognition	RFID in a compatible AMS system
Density	1,37 g/cm³
Glass transition temperature	71 °C
Deflection temperature under load	71,2 °C at 1,8 MPa; 72,3 °C at 0,45 MPa
Food contact	Not intended for food contact