Bambu Lab Part Cooling Fan for H2D/C - FAF013

Bambu Lab Part Cooling Fan for H2D/C – FAF013

Original Part Cooling Fan (FAF013) designed for professional 3D printers Bambu Lab H2D and H2D Pro (H2D/C). This fan is located on the bottom side of the toolhead and, in combination with the air duct, rapidly cools the freshly extruded filament, ensuring high print quality even at higher speeds.

It is ideal as a replacement part in case of failure, increased noise, or reduced performance of the original fan. By using an original Bambu Lab part, you maintain reliability and precise control of the cooling system with a closed loop control.

Key features

• Original Bambu Lab spare part for H2D / H2D Pro (H2D/C)
• Specially designed for cooling printed layers (part cooling) on the toolhead
• Precise speed control in closed loop control mode – stable airflow
• Provides sharper details, better overhangs and bridges even with technical materials
• Compatible with the high-temperature H2D printer – suitable for ABS, ASA, PC, PA, composites and other materials
• Includes mounting screws for easy and quick replacement
• Design and dimensions fully match the original factory fan

Compatibility

This model is intended for Bambu Lab H2D series 3D printers:

• Bambu Lab H2D
• Bambu Lab H2D Pro (H2D/C)

This is not a fan for the hotend (hotend cooling fan) nor an Auxiliary Part Cooling Fan – it is the main Part Cooling Fan on the toolhead.

Typical use

• Replacement of the original fan in case of:
  • increased noise
  • speed fluctuations or fan error messages
  • mechanical damage or clogging
• Preventive replacement in intensively used H2D/H2D Pro in company or production environments
• Service intervention as part of printer maintenance

Benefits of proper print cooling

A properly functioning Part Cooling Fan is essential for:

• high-quality surface of the print without deformations
• sharp edges and fine details, for example on functional parts
• reliable bridges and overhangs without sagging and drooping
• dimensional stability and better accuracy with technical materials

On a professional printer such as the Bambu Lab H2D/H2D Pro with high speeds and an enclosed chamber, a properly working part cooling has a crucial impact on consistent results.

Package contents

• 1× Bambu Lab Part Cooling Fan for H2D/C – FAF013
• 2× screw BT2.6-8
• 2× screw BT3-20

The air duct is not included – the original one from the printer is used, or it is purchased separately as another spare part.

Installation recommendations

• Before replacement, switch off and disconnect the printer from the power supply.
• Follow the replacement procedure according to the Bambu Lab instructions (Bambu Wiki / manual for H2D).
• Check that the fan cable is connected to the correct connector on the toolhead.
• After replacement, perform a fan test (via the printer menu or a test print) and verify proper operation.

Technical parameters

Parameter	Value
Manufacturer	Bambu Lab
Part number	FAF013
Name	Part Cooling Fan for H2D/C (toolhead)
Purpose	Cooling of printed layers (part cooling)
Compatibility	Bambu Lab H2D, Bambu Lab H2D Pro (H2D/C)
Control type	Closed loop control (speed control)
Location	Toolhead – bottom part near the extruder/air duct
Package	1× fan, mounting screws
Category	Spare parts – fans and cooling

Who this part is suitable for

• Companies, schools, and laboratories that operate Bambu Lab H2D/H2D Pro printers in demanding conditions and need fast replacement of worn parts.
• Service and technical departments that provide maintenance for a fleet of Bambu Lab printers.
• Advanced users who want to have a spare fan ready to minimize printer downtime.

By using the original Bambu Lab Part Cooling Fan FAF013, you can be sure that you will maintain the cooling parameters designed by the manufacturer and achieve stable print quality while fully utilizing the potential of the H2D and H2D Pro printers.

Key features:

• Original Bambu Lab Part Cooling Fan FAF013 replacement fan for H2D and H2D Pro (H2D/C) 3D printers
• Ensures effective cooling of printed layers directly on the toolhead
• Precise speed control in closed loop control mode for stable airflow
• Improves surface quality, details, overhangs, and bridges in high-speed printing
• Fully compatible with high-temperature and technical materials supported by H2D/H2D Pro
• Mounting screws are included for quick and simple replacement
• Designed for professional and continuous operation in corporate and industrial environments