Bambu Lab H2D / H2S Textured PEI Plate - FAP025

Bambu Lab H2 Series Textured PEI Plate

Bambu Lab Textured PEI Plate for the H2 series is an original build plate designed specifically for Bambu Lab H2 Series (e.g., H2D) printers. The combination of a flexible steel plate and a textured PEI coating ensures excellent adhesion of the first layers and at the same time easy removal of models after cooling.

Main advantages

• Original Bambu Lab accessory for H2 Series – 100% compatibility with H2 printers (H2D, etc.).
• Textured PEI surface – creates a matte, slightly structured bottom surface of models with great adhesion.
• Flexible steel plate – after printing is finished, just remove the plate from the bed and bend it; the print releases easily without the use of metal scrapers.
• High thermal resistance – the surface is designed for printing on a heated bed up to approx. 120 °C (H2 Series heatbed temperature).
• Support for a wide range of filaments – PLA, PLA-CF, PETG, PETG-CF, ABS, ASA, PC, PA/PA-CF, PAHT-CF, TPU and other technical materials (with recommended temperatures and optional use of glue).
• Gold finish – attractive "gold" look of the surface, identical to the original plate supplied with the H2D.

Compatibility

• Printers: Bambu Lab H2 Series (e.g., H2D) – recommended and supported build plate in H2D user documentation.
• Plate type: Magnetic/flexible build plate of the H2 system, attaches to the printer's magnetic heated bed.

Note: The Textured PEI plate for the H2 Series is not intended for A1 / A1 mini models, which have different dimensions and plate thickness requirements.

Technical parameters

Parameters are based on official specifications of the Bambu Textured PEI plate for the H2 series (H2D):

Parameter	Value
Plate material	Flexible stainless steel (301SEH) with textured PEI powder coating
Steel sheet thickness	approx. 0,5 mm
PEI coating thickness	approx. 0,075 mm
Usable print area	approx. 256 × 256 mm (H2D working area)
Max. recommended surface temperature	up to approx. 120 °C (heatbed)
Surface color	gold, textured
Recommended materials	PLA/PLA-CF/PLA-GF, ABS/ASA, PETG/PETG-CF, PET-CF, PA/PA-CF/PAHT-CF, PC/PC-CF, TPU, PVA
Recommended heatbed temperatures	e.g. PLA 45–60 °C, PETG 60–80 °C, ABS/ASA 90–100 °C, PA/PC 90–110 °C (depending on material)
Cleaning	water + detergent, or IPA; do not use acetone

Recommendations for use

• Preparation before printing
  • Make sure the plate is correctly aligned on the heated bed and firmly attached by magnets.
  • Before printing, clean the surface with warm water and a little detergent, then dry with a non-abrasive cloth.
• Temperature settings
  • Follow the filament manufacturer's recommendations and tables for textured PEI surfaces (e.g. above).
  • For materials with extreme adhesion (PC, PA-CF), a separation layer (glue) can be used for easier removal.
• Removing the print
  • Wait until the plate has completely cooled down, then remove it and gently bend it – the model usually releases without force.
  • Avoid metal scrapers, which can damage the PEI surface.
• Maintenance and service life
  • If adhesion decreases over time, the surface can be lightly sanded with fine sandpaper (e.g. grit 600) to restore adhesion.
  • The Textured PEI plate is a consumable part, gradual wear of the coating is expected – frequent printing of abrasive materials (e.g. CF) shortens service life.

Who is this plate suitable for

• Bambu Lab H2 Series users who want a second or replacement original Textured PEI plate.
• Printers who prefer a matte, structured first surface instead of a smooth glossy one.
• Operators with frequent printing and a requirement for a stable first layer without the need for glues for common materials.

Tips for better results and SEO keywords

When describing or searching for this product, users often use queries like:

• "Bambu Lab H2 textured PEI plate"
• "PEI plate H2D"
• "Bambu Lab gold PEI plate"
• "plate for Bambu H2 series"

By including these phrases in project names, notes, or documentation, you will more easily find tutorials and settings for this specific plate.

Key features:

• Original Textured PEI plate for Bambu Lab H2 Series 3D printers (e.g., H2D)
• Excellent first layer adhesion for a wide range of filaments including technical materials
• Flexible stainless steel allows easy removal of prints by simply bending the plate
• Textured PEI surface leaves a matte, slightly structured bottom surface on models
• Compatible with high bed temperatures up to around 120 °C
• Easy maintenance – cleaning with water and detergent, option to restore adhesion by light sanding
• Consumable part designed for long-term use with the original Bambu Lab magnetic system
• Gold color finish matching the design of Bambu Lab H2 printers