Doprava zdarma od 1 999 Kč
Rychlá expedice
Ověřený obchod
Tisíce zákazníků
Doprava zdarma od 1 999 Kč
Original Bambu Lab FAC171 filament cutter stopper for the Bambu Lab P2S 3D printer. The part is installed on the left inner side of the print chamber and activates the cutter lever so that the filament is separated above the hotend before material change.
Objednávky vyřizujeme a odesíláme ihned během pracovního dne.
Bambu Lab Filament Cutter Stopper FAC171 is an original replacement assembly designed for the Bambu Lab P2S 3D printer. It is installed on the left inner side of the print chamber, where it presses the cutter lever during material change or unloading. This separates the filament above the hotend, allowing the printer to continue with the subsequent material change process.
Using an original replacement part ensures the correct geometry, precise fit, and proper movement of the cutting mechanism. Replacement is particularly suitable if the original stopper is damaged, worn, or the filament cutter is not working correctly.
| Parameter | Value |
|---|---|
| Compatible printer | Bambu Lab P2S |
| Product series | Bambu Lab P2 Series |
| Part code | FAC171 |
Before ordering, check the printer model and the designation of the part being replaced. This stopper is not intended as a universal replacement for other Bambu Lab printer series.
Before starting the replacement, turn off the printer and disconnect it from the power supply. After installation, check the free movement of the mechanism and perform a test filament loading and unloading. During installation, follow the manufacturer's service instructions for the Bambu Lab P2S model.