Bambu Lab desiccant for AMS (6 pcs) - FAZ002 - Silica gel

Product description

The original Bambu Lab desiccant for AMS (6 pcs, FAZ002) is a set of desiccant sachets designed specifically for the Bambu Lab AMS unit. It ensures consistently low humidity inside the AMS so that your filaments remain dry, do not absorb moisture from the surroundings, and do not degrade their printing properties.

Each package contains 6 desiccant sachets, which are inserted into the dedicated positions in the AMS. The desiccant is supplied as a white powder in a sealed sachet – before use, the sachets must be removed from the protective plastic packaging.

Key features

• Original Bambu Lab accessory – compatible with the AMS unit (for X1/X1C/X1E, P1P, P1S, etc.).
• Keeps filaments dry – reduces air humidity in the AMS and protects the material from becoming damp.
• 6 pcs per pack – a convenient stock of desiccants for repeated replacement.
• Easy installation – simply insert 2–3 sachets into the designated space in the AMS and close the cover.
• Visual status check – the desiccant gradually changes from white powder to yellow paste, indicating saturation with moisture.
• Recommended regular maintenance – the desiccant status should be checked approximately every 2 weeks.

How the desiccant works

The desiccant based on calcium chloride (CaCl₂) is a very effective moisture absorber. After being inserted into the AMS:

• in its new state it has the form of a white powder,
• as it absorbs moisture, it changes into a yellow paste, which gradually fills the sachet,
• once it is completely yellow, it loses the ability to further dry the air and must be replaced with a new sachet.

Dry filament is essential for quality 3D printing – especially for moisture-sensitive materials such as Nylon, PA-CF, PETG, TPU and other engineering plastics.

Instructions for use

1. Remove 2–3 new desiccant sachets from the supplied transparent plastic packaging.
2. Remove the protective film from the desiccant (if present) and insert the sachets into the designated position in the AMS.
3. Close the AMS cover and make sure that the locking latches are properly closed so that the internal space is as well isolated from the ambient air as possible.
4. Regularly check the condition of the desiccant – approximately every 2 weeks.
5. If the entire sachet is yellow and pasty, replace it with a new one. At the same time, it is recommended to re-dry any already damp filaments in a filament dryer.

Recommendations for best results

• Keep the AMS closed when you are not printing or handling filaments.
• In a room with high humidity, it may be necessary to replace the desiccant more frequently.
• For long-term storage of sensitive filaments, combine the AMS with desiccants and, if necessary, with an external filament dryer.

Package contents

• 1× set Bambu Lab Desiccant for AMS – FAZ002
• A total of 6 desiccant sachets for the AMS unit

Technical parameters

Parameter	Value
Manufacturer	Bambu Lab
Manufacturer designation	FAZ002
Name	Desiccant for AMS (6 pack)
Purpose	Desiccant for the Bambu Lab AMS unit
Product type	Accessory / spare part for filament storage
Number of pieces per package	6 sachets
Desiccant material	Calcium chloride (CaCl₂)
Desiccant color (new)	white powder
Color after moisture saturation	yellow paste
Recommended service life	approx. 1 month when using 2 sachets (indicative, depending on ambient humidity)
Recommended status check	approximately every 2 weeks
Package weight (manufacturer)	approx. 0,175 kg
Compatibility	Bambu Lab AMS (P1P, P1S, X1/X1C/X1E and other models using AMS)

Who this product is suitable for

This desiccant is ideal for:

• users of Bambu Lab printers with an AMS unit,
• those who want to reliably protect filaments from moisture,
• anyone who prints from moisture-sensitive materials and requires consistent print quality,
• users looking for an original, perfectly fitting Bambu Lab spare part without having to experiment with alternatives.

Key features:

• Original Bambu Lab desiccant FAZ002 designed for the AMS unit
• Pack of 6 sachets for long-term maintenance of a dry environment
• Effectively reduces air humidity in the AMS and protects filaments from moisture absorption
• Easy installation – insert 2–3 sachets into the dedicated position inside the AMS
• Visual saturation indication – change from white powder to yellow paste
• Recommended regular check every 2 weeks for reliable operation
• Suitable for Bambu Lab printers with AMS (P1P, P1S, X1/X1C/X1E and others)
• Ideal for users printing from moisture-sensitive materials (e.g. Nylon, PETG, TPU)