Bambu Lab Cool Plate SuperTack Pro for P2S / X2D (FAP032)

Bambu Lab Cool Plate SuperTack Pro for P2S (FAP032)

The original Bambu Lab Cool Plate SuperTack Pro is specifically designed for Bambu Lab P2S printers. It utilizes the new SuperTack Pro surface, which ensures very strong adhesion for PLA and PETG even at significantly lower heated bed temperatures. Thanks to this, it helps reduce warping, increases print success rates, and saves energy at the same time.

Main features

• Enhanced adhesion for PLA and PETG The SuperTack Pro surface is optimized for PLA and PETG materials. Even at low bed temperatures, it provides strong initial adhesion, so models hold better during high speeds and for larger surface areas.
• Easy removal of models after cooling Once the build plate cools down after printing, the adhesion is significantly reduced, so models can be easily and safely removed without using great force and without the risk of damaging the prints.
• Durable and long-term stable surface SuperTack Pro is designed as a long-life coating – even after hundreds of prints, it retains its sticky properties and stable behavior. This reduces overall operating costs because the plate does not need to be replaced as often.
• Fine matte bottom surface of prints The plate surface creates a smooth to finely matte bottom surface of the model, which helps mask small imperfections and optical flaws of the first layer. The bottom side thus looks professional and uniform.
• Energy savings thanks to low bed temperature SuperTack Pro achieves high adhesion even at very low heated bed temperatures, so the printer consumes less energy. This is advantageous both from an operating cost and ecological perspective.
• Original part for Bambu Lab P2S This variant of the plate is intended directly for the Bambu Lab P2S (active printing area dimensions 256 × 256 mm). It therefore ensures full compatibility with the mechanics, calibrations, and profiles in Bambu Studio.

Recommendations for use

• Before first use and regularly during operation, wash the plate surface with warm water and mild detergent. This removes grease residues and dust that can impair adhesion.
• Do not use aggressive solvents (especially pure isopropyl alcohol) for daily cleaning – they can shorten the life of the surface.
• For optimal results, use the Cool Plate SuperTack Pro / P2S profile in Bambu Studio and the recommended temperatures for PLA and PETG.
• Consider the plate as a consumable part – the surface will wear out over time, which is a normal occurrence for this type of plate.

Who it is for

Bambu Lab Cool Plate SuperTack Pro for P2S is ideal for users who:

• print mainly PLA and PETG and require the highest possible print success rate,
• struggle with corner lifting and warping of larger parts,
• want a reliable smooth/matte surface on the bottom side of models,
• prefer original Bambu Lab accessories with full support in the printer's software and firmware.

Package contents

• 1× Bambu Lab Cool Plate SuperTack Pro for P2S
• protective film (factory applied)

Invest in a stable and energy-efficient first-layer solution for your Bambu Lab P2S – SuperTack Pro will help you reduce the number of failed prints and ensure professional results even for more demanding projects.

Key features:

• Original Bambu Lab Cool Plate SuperTack Pro for P2S 3D printers
• SuperTack Pro surface with very strong adhesion for PLA and PETG
• Reliable model holding even at low bed temperatures and higher printing speeds
• After cooling, models release easily and can be safely removed
• Durable coating designed for long-term use and hundreds of prints
• Finely matte, aesthetically clean bottom surface of prints
• Optimized profiles in Bambu Studio for hassle-free use
• Full compatibility with Bambu Lab P2S (printing area 256 × 256 mm)