AMS, reborn.

The brand new second-generation AMS 2 Pro features more powerful feeding motors that significantly increase filament feeding efficiency and speed up multicolor and multi-material printing. Additionally, AMS 2 Pro introduces a filament drying function using active ventilation in a fully sealed system, which significantly increases drying efficiency and keeps the filament in optimal condition for a long time.

Designed for better drying and use of technical filaments

Faster multicolor printing

Bambu's powerful permanent magnet synchronous servo motor speeds up filament feeding by 60 %.

Fast filament drying and airtight storage

Automatic ventilation helps reduce humidity during drying while ensuring an airtight seal for weeks of quality printing.

Serial connection of up to 4× AMS 2 Pro + 8× AMS HT

Supports printing from up to 24 different filaments and combinations of colors and materials.

Main Features

• Drying temperature up to 65 °C

Efficient drying for a wide range of filaments.

• 60 % faster filament feeding

Brushless motor significantly increases efficiency.

• Automatic spool rotation during drying

Ensures more even drying of filaments.

• RFID synchronization

Automatic loading of drying settings for official Bambu filaments – no manual entry.

• Faster multi-material printing

Saving an average of 10 minutes for every 100 filament changes.

Improved, refined design

• Easily accessible filament tubes

Transparent guidance and quick-release mechanism for easy removal of jammed filament.

• Ceramic filament inlet

Higher durability and longer lifespan.

• Accurate temperature and humidity sensor

For reliable and readable data about conditions inside the unit.

• Compatibility with all Bambu Lab printers

AMS 2 Pro is compatible with all Bambu Lab devices.

Specifications

•Dimensions: 372 × 280 × 226 mm

•Weight: 2,5 kg

• Cover material: ABS/PC

Supported filaments:

PLA, PETG, ABS, ASA, PET, PA, PC, PVA (dried), BVOH (dried), PP, POM, HIPS, Bambu PLA-CF / PAHT-CF / PETG-CF / supports for PLA and PETG, and TPU suitable for AMS.

Unsupported filaments:

TPE, regular TPU, PVA (wet), BVOH (wet), Bambu PET-CF, TPU 95A and other filaments containing carbon or glass fibers.

• Filament diameter: 1,75 mm

• Spool dimensions:

•Width: 50–68 mm

•Diameter: 197–202 mm

• RFID identification: Yes

• Max. drying temperature: 65 °C

Supported filaments for drying:

PLA, PETG, supports for PLA/PETG, ABS*, ASA*, PET*, PA*, PC*, PVA*, BVOH*, PP, POM*, HIPS*, Bambu PLA-CF*/PAHT-CF*/PETG-CF*, and TPU for AMS*

*Filaments marked with an asterisk require a higher drying temperature – AMS 2 Pro cannot dry them completely. For better results, it is recommended to use AMS HT.

•Power supply: 24 V, 4 A

Package Contents

•AMS 2 Pro

•Drying agent (desiccant)

•PTFE tube

•6-pin Bambu Bus cable

Frequently Asked Questions

1. Does the AMS 2 Pro have a power port in addition to the 6-pin cable?

Yes. When using one AMS 2 Pro with H2D, no external power supply is needed.

However, if you connect multiple AMS 2 Pro units and some are used exclusively for drying, these units require an external adapter, which can be purchased in the official Bambu Lab e-shop.

2. Can the AMS 2 Pro be used with X1 and P1 series printers?

Yes. For basic automatic feeding function, the 6-pin cable is sufficient.

If you want to use the drying function, an external adapter is required.

The drying function will be activated for older printers via OTA update by the end of April 2025.

3. Can AMS and AMS 2 Pro be combined?

Yes, you can use them simultaneously with one H2D printer.

4. Can I dry filament during printing?

No, it is not yet possible to dry filament in AMS 2 Pro/HT units that are actively participating in printing.

Drying is only possible on those units that are not involved in the current print.

If the printer is powering a print and simultaneously one AMS 2 Pro unit for drying, the drying performance will automatically decrease. For better results, we recommend using an external power adapter.

5. Can drying be powered directly from the printer?

Yes, H2D can power one AMS 2 Pro unit for drying.

When using multiple units, an external adapter must be used for each additional unit.