Anycubic Standard UV Resin V2 Clear (transparent) 1 kg

Overview

Anycubic Standard UV Resin V2 Clear is a versatile photopolymer resin for everyday printing of accurate and strong models in a transparent finish. The second generation (V2) offers a balanced ratio of strength and toughness, reduced odor, and reliable detail reproduction with shrinkage of only approx. 4.3–5.6%. Compatible with most LCD/MSLA printers operating in the 365–405 nm range.

Note: The standard “Clear” is transparent to semi-transparent after curing; for a crystal-clear look, we recommend spraying the surface with a clear coat after printing or applying a thin layer of clear resin and then curing.

Why choose it

• Higher V2 toughness – less brittle, better resists impacts and bending.
• Fast curing – short exposure times on modern mono LCD printers (typically 1.5–3 s/layer).
• High accuracy – clean edges, fine details, and low shrinkage.
• Wide compatibility – works great on Anycubic Photon printers (M3/M5/M5s, Mono X, Mono 2, etc.) and other LCD/MSLA models.

Recommended applications

• Prototypes and functional parts
• Miniatures, models, design and technical components
• Light covers and transparent parts (with optional post-processing for higher clarity)

Technical parameters

• UV wavelength: 365–405 nm
• Density: 1.05–1.25 g/cm³
• Viscosity: 250–350 mPa·s
• Hardness: 80–83 Shore D
• Elongation at break: 25–30%
• Curing shrinkage: 4.3–5.6%
• Tensile strength: 35–45 MPa
• Flexural strength: 40–50 MPa
• Flexural modulus: 1500–2100 MPa
• Heat deflection temperature (HDT): 60–65 °C
• Recommended exposure (mono LCD): 1.5–3 s/layer, bottom layers 20–40 s
• Cleaning: IPA (isopropyl alcohol)
• Shelf life: approx. 1.5 years
• Packaging/Weight: 1 kg (bottle)

These values are based on the official parameters of Anycubic Standard Resin V2 and a Czech reseller’s product sheet. Specific settings may vary by printer and conditions.

Compatibility

• LCD/MSLA printers with UV LED 365–405 nm, e.g., Anycubic Photon series (Mono, Mono 2, Mono X/X2/6K/6Ks, M3/M5/M5s), and other common 405 nm models.

Tips for best clarity

1. Print thicker walls and higher infill; avoid micro-voids.
2. After cleaning, let the model dry completely before final curing.
3. For a glass-like effect, use a clear coat or a thin layer of clear resin and then cure.

Safety and storage

• Print in a well-ventilated area, use gloves and eye protection.
• Store tightly closed, out of reach of children and direct UV light, at room temperature.

Key features:
Enhanced toughness of the V2 version for less brittle prints
High accuracy and low shrinkage of 4.3–5.6%
Fast curing on mono LCD (1.5–3 s/layer)
Wide compatibility with 405 nm LCD/MSLA printers
Transparent finish suitable for aesthetic and technical parts
Easy IPA cleaning and stable printing results