Alternative Bambu Lab Nozzle Wiper Pad 1 pc for P2S

Replacement Nozzle Wiper Pad for Bambu Lab P2S

Keep your 3D printer nozzle clean with the alternative Nozzle Wiper Pad cleaning pad, designed for the Bambu Lab P2S printer. The pad is installed in the Purge Wiper cleaning mechanism, where it wipes extruded filament residue from the nozzle surface during the automatic cleaning cycle.

Cleaner Nozzle and a More Reliable Start to Printing

A worn or damaged wiper may not make proper contact with the nozzle. Fibers, droplets, or other material residue may then remain on the hotend and be transferred to the print bed or model. Regular inspection and timely replacement of the Nozzle Wiper Pad help maintain the proper operation of the automatic cleaning system.

The soft silicone material creates good contact with the hotend during wiping while also being gentle on its surface. The pad is suitable as an affordable consumable replacement part for routine printer maintenance.

Main Benefits

• Compatibility with Bambu Lab P2S
• Helps remove filament residue from the nozzle surface
• Supports a cleaner start to printing and a consistent first layer
• Soft silicone design with good contact with the hotend
• Direct replacement for a worn cleaning pad
• Suitable for regular maintenance and heavily used printers

When to Replace the Cleaning Pad

Replacement is especially recommended when the original pad is:

• cracked, torn, or deformed,
• heavily contaminated with baked-on filament,
• worn and no longer making proper contact with the nozzle,
• less effective during the automatic cleaning cycle.

Before installation, allow the hotend to cool and remove loose filament residue from around the cleaning mechanism. After replacement, check that the pad is seated correctly and that the automatic cleaning cycle runs properly.

Package Contents

• 1× alternative Nozzle Wiper Pad for Bambu Lab P2S

This is an alternative, non-original replacement part. Other components of the cleaning mechanism are not included in the package.

Key Features:

• Designed for the Bambu Lab P2S 3D printer
• Helps clean the nozzle during the automatic wiping cycle
• Soft silicone material that is gentle on the hotend surface
• Helps reduce the transfer of filament residue to the first layer
• Simple replacement for a worn cleaning pad
• The package contains 1 piece