AESUB Blue 400 ml Scanning Spray

Product Description

AESUB Blue 400 ml is a universal vanishing 3D scanning spray, developed by specialists in optical digitization. After spraying, it creates a matte white, very thin and homogeneous layer, which ensures ideal conditions for optical 3D scanning even for problematic surfaces – glossy, dark, transparent, textured or very complex. After scanning is complete, the layer evaporates (sublimates) on its own within a few hours, so no subsequent cleaning of the scanned object or workplace is required. AESUB Blue does not contain pigments, which minimizes the risk of contamination of sensitive areas, measuring equipment or delicate parts.

Key Features

• Vanishing (sublimating) layer – disappears completely after a few hours
• Pigment-free – leaves no residue, minimizes the risk of laboratory and equipment contamination
• White, matte surface – ensures excellent scannability and contrast
• Very thin layer: approx. 8–15 μm – does not affect measurements of precision parts
• Scanning time approx. 1–2 hours – stable surface for most measurement tasks
• Sublimation time approx. 4 hours (indicative, depending on the environment) – surface returns to its original state
• Ideal for various types of optical 3D scanners (structured light, laser, photogrammetry)
• Suitable for transparent, glossy, dark and highly complex objects
• Convenient use in production and laboratory – without the need to move parts to a "dirty" workplace

Typical Applications

AESUB Blue is primarily intended for optical 3D scanning and non-contact measurement in areas such as:

• Reverse engineering and development (R&D, prototyping)
• Metrology and quality control in production
• Automotive, aerospace, energy, mechanical engineering
• Tool shops, molds, castings, pressed parts
• Plastics, metals, composites, ceramics and other technical materials

It is particularly useful where it is necessary to:

• remove reflections and surface transparency,
• even out differences in texture and color,
• preserve the original surface without residue after measurement.

Instructions for Use (brief)

1. Preparation:
   • Shake the can well before use.
   • Ensure that the scanned part is dry and free of coarse dirt and grease.
2. Spray Application:
   • Hold the spray roughly 15–20 cm from the surface.
   • Apply in a continuous motion in thin layers until the object gains a uniform matte white surface.
   • If necessary, use several very thin layers instead of one thick one.
3. Scanning:
   • Start scanning after the layer has dried briefly.
   • Utilize the time window of approx. 1–2 hours, when the layer is stable and suitable for measurement.
4. After Scanning:
   • The spray evaporates itself, no cleaning or rinsing is required.
   • The surface of the object returns to its original state (assuming material compatibility with the spray – always test on an inconspicuous spot).

Technical Parameters

Parameter	Value
Product type	Vanishing (sublimating) 3D scanning spray
Packaging volume	400 ml aerosol
Layer color	White, matte
Layer thickness	approx. 8–15 μm
Scanning time	approx. 1–2 h
Sublimation time	approx. 4 h (depending on environment and layer)
Pigments	No – pigment-free
Suitable use	Optical 3D scanners (structured light, laser, photogrammetry)
Areas of use	Metrology, reverse engineering, quality control, development, manufacturing

User Benefits

• Time and cost savings – no need for cleaning the object after scanning.
• Safer for sensitive environments – pigment-free, lower risk of contaminating laboratory and production areas.
• Higher data quality – improvement of contrast and detail readability for demanding surfaces.
• High accuracy – very thin layer minimizes the effect on dimensional measurement accuracy.

Safety Information

• This is a pressurized aerosol – protect from overheating and open flames.
• Use in well-ventilated areas and follow safety instructions on the label and in the safety data sheet.
• Keep out of reach of children.

Key Features:

• Vanishing (sublimating) 3D scanning spray for professional use
• Pigment-free – minimizes risk of contamination of sensitive areas and equipment
• Very thin homogeneous white layer (approx. 8–15 μm) for accurate measurements
• Significantly improves scannability of glossy, dark, transparent and complex surfaces
• Scanning time approx. 1–2 hours, sublimation time approx. 4 hours
• No need to clean parts after scanning – the layer disappears by itself
• Suitable for a wide range of materials and industrial applications