High-flow hotend for Bambu Lab P2S, H2 series and X2D

The integrated 3dacc High-Flow hotend is a practical upgrade and replacement part for Bambu Lab P2S, H2 series and X2D 3D printers. The optimized melting zone can melt filament faster and maintain stable extrusion even at high printing speeds. The manufacturer states that volumetric flow can be increased by up to 62,5 %, and that suitable large models can achieve a printing time reduction of up to 30 %. The actual benefit depends on the material used, temperature, model geometry and profile settings.

Integrated all-metal construction

The hotend features an integrated design that combines the main components into a compact unit. The all-metal construction supports rapid heat transfer and reduces the risk of leaks between the individual hotend components. The 0,4 mm nozzle diameter offers a universal balance between speed, strength and level of detail. It is therefore suitable for standard models, functional parts, prototypes and everyday batch printing.

Hardened steel nozzle

The hardened steel nozzle provides greater wear resistance than standard brass nozzles. In addition to standard filaments, it can also be used with selected abrasive and composite materials, always according to the filament manufacturer's recommendations and printer settings.

Main advantages

• high-flow design for faster extrusion,
• optimized and extended melting zone,
• universal 0,4 mm nozzle diameter,
• wear-resistant hardened steel nozzle,
• integrated all-metal construction,
• rapid and even heat transfer,
• stable printing at higher speeds,
• compatibility with Bambu Lab P2S, H2 series and X2D 3D printers.

Recommendations after installation

After replacing the hotend, set the correct 0,4 mm nozzle diameter in the printer or slicer and use the corresponding print profile. To take advantage of the high flow rate, it may be necessary to adjust the maximum volumetric speed according to the specific filament. For abrasive materials, follow the filament manufacturer's recommended nozzle diameter, temperature and other instructions.

Key features:

• High-flow construction with an optimized melting zone
• 0,4 mm hardened steel nozzle
• Integrated all-metal design
• Rapid heat transfer and stable extrusion
• Increased wear resistance
• Suitable for fast printing of large and densely filled models
• Designed for Bambu Lab P2S, H2 series and X2D